Overview
The REDARC Smart Start SBI212, part number RAESBI212, is a 12V battery isolator rated for 200A of continuous current. It uses a solenoid priority system that protects the start battery from excessive discharge while the auxiliary battery supplies non-essential loads.
Key features
- 200A continuous rating
- 12-volt DC output
- Solenoid priority system protects the start battery
- Auxiliary battery supplies non-essential loads
Sizing and wiring an isolator
A battery isolator lets the start battery stay charged while an auxiliary battery runs fridges, lights, winches and other accessories. The priority system separates the two batteries so accessory draw does not leave the engine with too little charge to start. The isolator works best when the auxiliary battery is sized for the loads it will carry between charges.
Choosing the right isolator starts with your electrical loads. Add up the current your accessories draw and compare it with the continuous rating before buying. Cable run length, fuse placement and a solid earth connection all affect how the system performs, so plan them alongside the isolator. Charging sources such as the alternator and any solar input also matter, since they set how quickly the auxiliary battery recovers.
- Check your continuous load against the rating
- Keep cable runs short and properly fused
- Verify the earth connection before first start
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAESBI212 |
| Model | SBI212 |
| Output | 12-volt DC |
| Continuous rating | 200A |
| Function | Solenoid priority system |
Vehicle fitment
Match the isolator to your battery layout and electrical loads before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The isolator connects the start and auxiliary batteries, so route its cabling with suitable fuses and disconnect both batteries before you begin.
What’s included
The isolator is the main unit. Check the package contents against your installation plan before starting.









