Overview
The Redarc G52-VVA is a 52 mm dual voltage gauge, part number RAEG52-VVA, that shows battery condition on your dash. It is a universal fit, so it is not built for one year, make or model. The main sizing consideration is the mounting hole, which needs to be 2.05 inches.
When a system failure occurs, the gauge reading drops as the battery discharges. An overcharge pushes the reading above the normal zone. Pre-set alerts watch battery health and change the backlight to amber or red, and an audible beep sounds when voltage falls below 11V or rises above 16V. The G52-VVA suits anyone who wants clear battery readings with alerts built into the gauge face.
Key features
- 52 mm gauge with a satin chrome bezel
- 13 backlight color options to choose from
- Pre-set alerts that switch the backlight to amber or red
- Audible beep when voltage drops below 11V or exceeds 16V
- Communication link that connects multiple REDARC gauges so backlight colors change together
- Optional Hall Effect Current Sensor (GS-AMPS) for a 100A rated current display
- Current display monitors current to or from the main or auxiliary battery once the sensor is fitted
Reading battery condition on the dash
A dash gauge gives an ongoing view of battery voltage, which helps spot a charging fault before it leaves you stranded. Readings are easiest to interpret when you watch them with the engine off and on, so note the normal reading for your vehicle. Sudden drops or spikes deserve attention even when the gauge stays in its normal zone.
Gauges that connect to a second battery or a current sensor give more context, since the readings show how each battery is charging and discharging. Routing sensor wires cleanly and keeping connections tight helps the readings stay accurate over time. Check mounting screws and wiring after rough trail use.
- Normal reading with engine off and on
- Sensor wiring routed clear of heat
- Tight connections at the gauge
- Checks after rough trail use
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAEG52-VVA |
| Gauge size | 52 mm |
| Voltage | Dual voltage |
| Mounting hole | 2.05 in |
| Bezel | Satin chrome |
| Backlight | 13 color options |
| Alert backlight | Amber or red |
| Audible alert | Below 11V or above 16V |
| Current display (optional) | 100A rated, with GS-AMPS Hall Effect current sensor |
| Mounting options | GH-CUP 2 in black plastic mounting cup; GH-MP1 gauge mounting panel |
Vehicle fitment
The G52-VVA is a universal fit, so it is not tied to a particular vehicle year, make or model. Fit depends on the dash opening: you need a 2.05-inch hole for the gauge body. The optional GS-AMPS sensor is a separate add-on for current readings.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The gauge requires a 2.05-inch mounting hole. REDARC offers two mounting solutions for it, the GH-CUP mounting cup and the GH-MP1 gauge mounting panel, so choose the one that suits your dash. The current display needs the GS-AMPS Hall Effect sensor. Several REDARC gauges can be joined by a communication link so their backlight colors change together.
What’s included
The gauge is a 52 mm dual voltage unit with a satin chrome bezel and 13 backlight color options. Confirm whether a mounting cup or panel is in your box before starting work.
Not included: Hall Effect Current Sensor (GS-AMPS), needed for the optional 100A current display. The GH-CUP and GH-MP1 mounting accessories are separate options.









