Overview
The REDARC Smart Start SBI12D, part number RAESBI12D, is a 12V 100A dual sensing battery isolator that REDARC describes as microprocessor-controlled. It is made for a dual battery system and works as a solenoid priority system, protecting the start battery from excessive discharge while the auxiliary battery supplies non-essential loads. No vehicle is named.
Key features
- Microprocessor-controlled dual sensing operation
- Solenoid priority protects the start battery from excessive discharge
- Auxiliary battery supplies non-essential loads
- 12V, 100A rating
Dual battery charging basics
A dual battery system keeps the starting battery separate from the accessory battery, so a fridge, lights or a winch can draw power without leaving the vehicle stranded. An isolator controls when the auxiliary battery charges from the alternator. Solenoid systems and smart isolators both aim to protect the start battery, but they behave differently under load and voltage drop.
Cable size is a major factor in charging performance. Long runs and thin wire cause voltage drop, which can stop the auxiliary battery from fully charging. Use cable sized for the charge current and fuse each line close to its battery. Mount the isolator in a cool, dry, ventilated spot, and keep the cable runs as short as the layout allows.
- Keep charge cable runs short
- Fuse each line near its battery
- Mount away from heat and moisture
- Check voltage at both batteries after install
Specifications
| Brand | Redarc |
|---|---|
| Part number | RAESBI12D |
| Model | SBI12D |
| Voltage | 12V |
| Current rating | 100A |
| Control | Microprocessor-controlled, dual sensing |
| Function | Solenoid priority system |
Vehicle fitment
No make, model, year or trim is named for the SBI12D, so it is not matched to a vehicle. Check that the 100A rating suits your charging system and the loads you plan to run.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Disconnect both batteries before installing and fuse the cables at the size the wiring plan calls for. Follow the wiring steps in order and confirm the connections before reconnecting power.
What’s included
The isolator is one unit. Check the wiring, fuses and mounting parts you have against your installation before starting.









