Overview
The ReadyLift 44-2002 is a heavy duty radius arm kit for 4WD 2005 to 2019 Ford F-250 and F-350 Super Duty trucks. It fits the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL and XLT trims and is a direct fit.
Radius arms locate the front axle. Heavy duty arms position the axle properly on a lifted truck, so tracking can be set correctly. The arms also allow caster to be added, which improves alignment on lifted or leveled trucks.
The arms are made from thick steel with a tabbed and slotted design, and they have a powder coated finish. The urethane bushings last longer than standard bushings and can be greased through a zerk fitting. The arms are built to hold up under off-road conditions and suit towing, hauling and daily driving as well as off-roading.
Key features
- Thick steel with a tabbed and slotted design
- Powder coated finish
- Urethane bushings with a zerk fitting for grease
- Allows caster to be added for alignment on lifted or leveled trucks
- Positions the front axle for correct tracking
Caster, bushings and alignment
Radius arms control how the front axle moves fore and aft as the suspension travels, which affects tracking and steering feel. When a truck is lifted, the stock geometry changes, and radius arms restore a controlled position for the axle. Setting caster correctly also depends on the axle and steering components, so a shop with an alignment rack is worth using after any change.
Urethane bushings are stiffer than rubber, which can mean more road noise and a firmer ride over small bumps. That stiffness helps keep the axle located under braking and acceleration. Greasing the zerk fitting on a regular schedule keeps the bushings moving freely and reduces wear at the sleeves.
Inspect the arms at each service for cracked welds, bent tabs and worn bushings. Look for play at the axle end, clunks over bumps, or uneven tire wear, which can all point to a worn arm or bushing. Check the bolts that hold the arms to the frame and axle, since loose hardware is a common source of noise.
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY44-2002 |
| Product type | Heavy duty radius arm kit |
| Material | Thick steel, tabbed and slotted design |
| Finish | Powder coated |
| Bushings | Urethane, greasable by zerk fitting |
| Position | Front axle |
| Drive type | 4WD |
| Fitment type | Direct fit |
| Vehicle | Ford F-250 and F-350 Super Duty, 2005 to 2019 |
Vehicle fitment
Fits the 2005 to 2019 Ford F-250 Super Duty and F-350 Super Duty in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
F-450 and F-550 4WD trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm the arms, hardware and bushings against your installation before starting.








