Overview
The Fabtech FTS413 is an I Beam/Radius Arm Kit, a radius arm suspension accessory sold under the Fabtech brand. Radius arms link the axle to the frame to control axle location and driveline movement, and this kit falls in that category.
Confirm the arm design, mounting points and vehicle application for your build before fitting anything.
Radius arm geometry and wear
Radius arms hold the axle in position fore and aft while the springs do their work, so they carry braking and acceleration forces. Their pivots and bushings take repeated load, and wear appears as clunking over bumps, wandering on the highway or uneven tire wear. Inspecting the mounts and sleeves at both ends during service shows whether the arm is still holding the axle where it belongs.
Changing arm length or mounting points alters caster and driveline angles, so the setup is worth checking as a whole. Driveline vibration often points to an angle problem rather than a faulty joint. Keeping the axle centered and the mounts tight makes a radius arm kit easier to live with over many miles.
- Look for cracked or split bushings at the axle and frame ends
- Check the mounting bolts for torque after the first few drives
- Note any change in pinion angle after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS413 |
| UPC | 674866007505 |
| Kit type | I Beam/Radius Arm Kit |
| Category | Radius arm suspension accessory |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the kit’s arms with your axle and frame before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the kit contents against your installation before starting, including any brackets, bushings or hardware you need.








