Overview
The ICON Vehicle Dynamics Ford F-250 and F-350 Super Duty Radius Arm System, part number ICO64041, is a front radius arm for 2005–2022 Super Duty trucks. It uses adjustable caster cams for lifts of 2.5 to 3 inches, with the radius arm kept in the factory pivot, so no caster bushings are needed.
The arm is fabricated and fully boxed, with a sealed pivot bushing that reduces road feedback and supports quiet, long-lasting operation. The profile is shaped for tire clearance at full steering lock, and a 37 inch tall tire clears the arm in that condition.
Key features
- Adjustable caster cams for lifts of 2.5 to 3 inches.
- Radius arm stays in the factory pivot, so caster bushings are not needed.
- Sealed pivot bushing that reduces road feedback.
- Fabricated, fully boxed construction for strength.
- Profile optimized for clearance on 37 inch tires at full steering lock.
Choosing caster and lift setup
Caster cams are a practical way to bring caster back into range on a lifted front end without swapping the arm’s pivot. The adjustment happens at the cam, so the arm stays where the factory placed it while its angle is tuned. Caster plays a large part in steering feel and straight-line stability, and a truck with too little caster can wander or pull under braking.
Before buying, match the arm to the lift you plan to run and to the tire size you intend to fit. Tire clearance at full steering lock is the limit most owners reach first, so measure it with the actual tire rather than relying on a figure alone. Upgrades to the steering stabilizer, tie rod ends and ball joints are often worth checking at the same time.
- Match the arm to your planned lift height
- Measure tire clearance at full lock
- Inspect ball joints and tie rod ends during install
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO64041 |
| Position | Front |
| Fitment type | Direct fit |
| Lift range for caster cams | 2.5 to 3 in |
| Tire clearance | 37 in tall tire at full lock |
| Pivot bushing | Sealed |
Vehicle fitment
Fitment covers the 2005–2022 Ford F-250 Super Duty and 2005–2022 Ford F-350 Super Duty across their trim levels. Ford F-150 and other Ford models are not included.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The caster cams are adjusted with the radius arm installed in its factory pivot. Set caster after the arm is in place, then check the alignment before driving the truck.
What’s included
The radius arm system with its sealed pivot bushing. Check the package contents against your installation before starting.








