Overview
The Rancho RS999333 is a rear RS9000XL Series shock absorber for big trucks, fitting the 1998–2004 Nissan Frontier and the 1987–1995 Nissan Pathfinder. It has a 2.75-in. (70mm) body around an 18mm Nitro Carb piston rod, is nitrogen gas charged, and is designed to work with the My Ride 9-position adjustable ride tuner.
The RS9000XL is designed for work or play, on or off the road. Fade resistant hydraulic fluid sits inside the liquid metallic body.
Key features
- 9-position adjustment designed for the My Ride tuning system
- 18mm Nitro Carb piston rod
- 2.75-in. (70mm) body with liquid metallic finish
- Nitrogen gas charged construction
- Fade resistant hydraulic fluid
- Polyurethane bushings
- Protective boot included
Rear shock tuning and setup
A rear shock on a midsize truck controls how the axle settles over bumps and under load, which affects comfort on rough pavement and stability on highway runs. When the rear end keeps bouncing after a dip or leans in turns, the damping may be worn even if the springs look fine. Replacing the rear shocks in pairs keeps the rear end balanced for the driver.
Nine damping positions let owners firm up the rear for loaded trips or soften it for daily commuting. Setting the tuning after the shock is installed makes the change easier to judge on a familiar road. Make one change at a time so the result is clear.
Dust and road grime can work into the rod and boot over time, so wipe the rod after dusty trips and check the boot for splits. Bushings and mounting hardware wear too, and worn bushings can make a new shock feel loose, so inspect them when the old shock is out.
- Look for oil on the shock body
- Check the rear bushings for cracking
- Re-check mounting bolts after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999333 |
| Shock series | RS9000XL Series |
| Position | Rear |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm Nitro Carb |
| Charge type | Gas charged |
| Bushings | Polyurethane |
| Tuning | 9-position, My Ride compatible |
| Lift/drop | 0 in. |
| Fitment type | Direct fit |
| Protective boot | Included |
Vehicle fitment
It fits 1998–2004 Nissan Frontier in Base, SC, SE, SVE and XE trims, and 1987–1995 Nissan Pathfinder in E, LE, SE and XE trims.
Model years and trims outside those are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is 0 in. lift/drop, so it is a stock-height replacement rather than a lift component. Support the vehicle securely before removing the old shock, and keep the protective boot in place during fitting.
What’s included
One rear RS9000XL unit and its protective boot are included. Check the package contents against your installation before starting.
Not included: the My Ride tuning system, a separate item that the shock is designed to work with.














