Overview
The Rancho RS55369 is a rear RS5000X Series shock absorber for Dodge Ram 1500 pickups from 2009 to 2010 and Ram 1500 pickups from 2011 to 2018. It is a direct-fit rear shock matched to a 2.5 in. lift.
The RS5000X design uses a patented rebound valving system and an advanced compression phase. For a 2009 to 2018 Ram 1500, match the year and trim against the list below before installing.
Key features
- Rear position, direct-fit design
- Matched to a 2.5 in. lift
- Patented rebound valving system
- RS5000X Series construction
Replacing rear shocks in pairs
Rear shocks on a half-ton pickup carry most of the load swing when the bed is loaded or towing starts. A single new shock next to a worn one can leave the truck leaning or bouncing differently from side to side, which makes steering feel less predictable. Matching both sides gives the rear end a consistent response over bumps and at highway speed.
Check the upper and lower mounts before installing, and look for rust or cracked rubber that could affect alignment of the new unit. Rear leaf springs, bump stops and bushings often wear at a similar rate, so inspecting them during the job can prevent a repeat repair.
- Inspect both rear shocks and mounts together
- Check leaf springs and bump stops for wear
- Re-check mounting bolts after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55369 |
| UPC | 39703006644 |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 2.5 in. lift |
| Series | RS5000X |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 1500 in the Laramie, SLT, ST, Sport and TRX4 trims, and the 2011–2018 Ram 1500 in the Big Horn, Express, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Rebel, SLT, ST, Special Service, Sport and Tradesman trims.
Ram 2500 and 3500 trucks, and Ram 1500 model years before 2009 or after 2018, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber. Check the package contents against your installation before starting, including any hardware you need.












