Overview
The Rancho RS7330 is a rear monotube shock from the RS7000MT Series for the 2007–2018 Jeep Wrangler (JK) with a 2.5 to 3.5 in. lift. It is a gas charged design with black natural rubber bushings, and the monotube construction dissipates heat well to limit fade.
Ten stage velocity-sensitive valving is built in, and the body diameter is 1.97 inch (50mm). It is a direct fit for 2 and 4-door Wranglers.
Key features
- Gas charged monotube design
- Ten stage velocity-sensitive valving
- 14mm chrome rod
- Black natural rubber bushings
- 1.97 inch (50mm) body diameter
- Protective boot included
Wrangler JK rear shock setup
The rear shock on a JK Wrangler carries a lot of the ride, particularly on uneven trails where the axle moves up and down quickly. Matching the shock to the lift height is the first step, because a shock that is too short or too long will limit travel. When lifting a JK, plan the full suspension rather than changing one part at a time.
Consider the mounting style and the bushings when you compare replacements. Worn bushings or a bent mount can shift the shock’s angle, which changes how the damping feels and wears the rod seal faster.
Inspect the rear shocks every few trail trips for leaks, loose mounts and torn boots. Swap both rear shocks at once so the back end stays even, and check the rear track bar and upper control arm bushings when handling feels off.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7330 |
| UPC | 39703002462 |
| Shock series | RS7000MT Series |
| Position | Rear |
| Shock type | Monotube, gas charged |
| Lift height | 2.5 – 3.5 in. lift |
| Body diameter | 1.97 inch (50mm) |
| Valving | Ten stage, velocity-sensitive |
| Rod | 14mm chrome |
| Bushings | Black natural rubber |
| Included | Protective boot |
| Mounting | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, along with the Unlimited versions of those trims. The rear position applies to these JK models.
Other Wrangler generations and other Jeep models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rancho gives a 2.5 to 3.5 in. lift range, so check that your suspension falls inside it before fitting the rear shocks. Keep fingers clear of the rod area when compressing the shock.
What’s included
The RS7330 rear shock with its protective boot.
Not included: No other hardware is included.









