Overview
The Rancho RS55289 is a front shock absorber for 2001–2004 Chevrolet Silverado 2500 and GMC Sierra 2500 trucks, the 2001–2010 HD versions of both, and the 2003–2009 Hummer H2 Base. It is sold individually, so a matched pair needs two separate units.
It is a front shock with ten-stage velocity sensitive valving, so damping changes with how fast the shock moves. It uses a twin tube cellular gas design with a 5/8-in. (16 mm) body and carries a limited lifetime warranty.
Key features
- Front mounting position
- Ten-stage velocity sensitive valving
- Twin tube cellular gas design, 5/8-in. (16 mm)
- 1/2-in. (12 mm) rods with chrome to nitro-carburized coating
- 1-3/8 inch diameter piston on most applications
- Limited lifetime warranty
Replacing front shocks on trucks
Front shocks on heavy-duty pickups work hard under towing and hauling, and their damping influences steering stability at highway speed. Velocity sensitive valving helps control both slow body motion and sharp impacts from potholes, which can make a noticeable difference on a loaded truck. Front shock wear often shows up as bouncing after a dip, body roll in turns, or a loose feel at the wheel.
Before replacing, check the front suspension for worn ball joints, tie rod ends and control arm bushings, since a loose part can wear a new shock quickly. Confirm the mounting points match the original shock, and make sure the boot seats correctly. Because each unit is sold on its own, plan to buy a second for the other side so damping stays balanced.
- Inspect ball joints and tie rod ends first
- Check mounting points against the original shock
- Replace both front shocks for matched damping
- Re-check bolts after the first highway drive
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55289 |
| UPC | 10039703006610 |
| Position | Front |
| Fitment type | Direct fit |
| Body | 5/8-in. (16 mm) twin tube, cellular gas design |
| Rod | 1/2-in. (12 mm), chrome to nitro-carburized coating |
| Piston | 1-3/8 inch diameter, on most applications |
| Valving | Ten-stage, velocity sensitive |
| Warranty | Limited lifetime |
| Sold | Individually |
Vehicle fitment
It fits the 2001–2004 Chevrolet Silverado 2500 in Base, LS, LT and WT trims, and the 2001–2010 Silverado 2500 HD in Base, LS, LT, LTZ and WT trims.
GMC coverage matches the Chevrolet side: the 2001–2004 Sierra 2500 in Base, SL, SLE, SLT and WT, the 2001–2010 Sierra 2500 HD in the same trims, and the 2007 Sierra 2500 HD Classic in SL, SLE, SLT and WT. The 2003–2009 Hummer H2 Base is also on the list.
Silverado and Sierra 2500 years after 2010 and all 1500 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift height entry refers to Rancho part RS6548B rather than an inch figure. If your truck needs a lift-height part, check that part number separately.
What’s included
One front shock absorber, sold individually.
Not included: Check the package contents against your installation before starting, including any lift-height parts you may need.












