Overview
The Rancho RS5392 is a front shock absorber for the 2000–2004 Nissan Xterra in SE and XE trims. It is listed in the RS5000 Series with gas charged construction and ten-stage velocity sensitive valving.
The RS5000 Series is made for everyday light trucks and SUVs, whether they run stock or lifted. It carries a limited lifetime warranty from Rancho.
Key features
- Front position for the Xterra
- Gas charged body
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Red protective boot included
Front suspension upkeep
An Xterra front shock is in constant use on gravel roads, trail approaches and the broken pavement that comes with everyday driving. It controls how quickly the front springs rebound after a bump, which helps the tires stay in contact with the ground and keeps the steering feeling settled. Front shocks usually show wear before other parts of the suspension, so a steady drift toward bouncing is worth noticing early.
Replacing a front shock is easiest when the rest of the front suspension has been checked first. Look at the upper mount, the lower attachment and the nearby bushings, and replace anything that is cracked or loose. Front shocks also affect alignment indirectly, so after the new unit is fitted, have the front tires checked for uneven wear over the next several drives.
- Check the protective boot for splits or grit
- Look for oil on the shock body
- Compare tire wear across both front tires
- Keep the mounting fasteners snug after the first drive
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5392 |
| UPC | 39703002950 |
| Series | RS5000 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop |
| Body | Gas charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod | 5/8-in. (16mm) diameter |
| Piston | 1 3/8-in. (35mm) diameter |
| Protective boot | Red, included |
| Unit | Each |
Vehicle fitment
It fits the 2000–2004 Nissan Xterra in SE and XE trims only. Other trims, years and Nissan models fall outside this fit.
Other Nissan models are not covered by this front-position listing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed lift is 0 in. lift/drop, so the shock is intended for stock height. Support the front suspension with stands before removing the old unit.
What’s included
The shock includes a red protective boot.
Not included: Have the mounting fasteners ready before starting, since they may need to be sourced separately.









