Overview
The Rancho RS7048 is a front monotube shock from the RS7000MT series, built for 5 to 6 in of lift. It fits the 2005–2016 Ford F-250 Super Duty and the 2014 and 2016–2018 Ram 2500 in several trims.
The shock is gas charged and uses ten stage velocity-sensitive valving on a 1.97 in (50 mm) body with a 14mm chrome rod. The valving is application specific, reacting across a wide range of off-road obstacles.
Key features
- Ten stage velocity-sensitive valving
- Gas charged monotube with high-pressure design
- 14mm chrome rod
- Black natural rubber bushings
- Protective boot included
- Brushed-zinc clear coated finish
Lift range and alignment
A front shock built for a set lift range works best when the truck sits within that range. Lift changes the shock’s working length and angle, which can affect damping, travel and steering feel. On a Ford Super Duty or Ram 2500 with a lift, the front suspension may need a close look to keep the ride balanced and the shock within its intended travel.
After a lift, the alignment, brake hose length, sway bar links and steering components can all be affected by the new ride height. Check them while the front end is apart, and have the alignment reset once the lift and shock are installed. Worn ball joints or tie rod ends should be replaced before the new shock goes in.
- Confirm the lift height against the shock range
- Check brake hose length after a lift
- Inspect sway bar links and bushings
- Have alignment set after installation
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7048 |
| UPC | 39703003230 |
| Shock series | RS7000MT Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift range | 5 to 6 in |
| Hydraulic type | Gas charged |
| Valving | Ten stage, velocity-sensitive |
| Body diameter | 1.97 in (50 mm) |
| Rod | 14 mm chrome |
| Bushings | Black natural rubber |
| Finish | Brushed-zinc clear coat |
Vehicle fitment
It fits the 2005–2016 Ford F-250 Super Duty in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT trims. It also fits the 2014 and 2016–2018 Ram 2500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims.
Ram 2500 model year 2015 is not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this shock is built for a 5 to 6 in lift, confirm that your truck’s lift falls in that range. After any lift change, have alignment checked, since ride height affects steering geometry.
What’s included
A Rancho RS7048 front shock with a protective boot and black natural rubber bushings.












