Overview
The Rancho RS55227 is a rear shock absorber from the RS5000X Series, fitting 1988-2000 Chevrolet and GMC K1500, K2500 and K3500 trucks, along with matching Suburban, Tahoe, Yukon and Blazer models in the years covered. It gives a 4 in. lift setting and is a direct fit in the rear position.
The RS5000X uses a patented valving system with advanced compression, engineered to improve handling on and off road. It pairs a progressive engagement valve with a tuned compression control valve.
Key features
- Progressive engagement valving
- Tuned compression control valve
- 16mm nitro-carburized rod
- Rebound bumper and double-welded loops
- Low-friction, self-lubricating seal
- Glass-filled, Fluon banded piston
Trail use and valving
Rear shocks manage how the axle moves after a bump and how quickly the body settles afterward. Valving decides how firm that control feels at different speeds. On trucks that see both highway and trail use, a balanced valve setup usually feels more predictable than a shock built for one condition only.
Rebound control and compression control do different jobs. Rebound handles the extension stroke as the wheel returns after a bump, while compression handles the stroke as the wheel moves up. A tuned compression valve can help keep the rear controlled over hard impacts, though extreme use may still call for a heavier duty setup.
Check the shock regularly for oil on the body, a loose mount, a worn bushing or a cracked boot. Rod damage from stones can leak fluid into the seal. Replacing shocks in pairs keeps the rear ride matched side to side, and worn bushings or mounts should be addressed at the same time.
- Inspect the rod for nicks and pitting
- Check the rebound bumper for wear
- Replace worn mounts with the shock
- Keep the boot intact on trail trucks
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55227 |
| UPC | 10039703008447 |
| Series | RS5000X |
| Body | Enlarged 2 1/4-in. twin tube |
| Rod | 16mm nitro-carburized |
| Bore | Full-displaced 35mm |
| Piston | 1 3/8-in. diameter sintered iron, glass-filled Fluon banded |
| Bushings | Black natural rubber |
| Seal | Low-friction, self-lubricating |
| Loops | Double-welded |
| Rebound | Rebound bumper |
| Charge | Gas pressurized |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 4 in. lift |
| Warranty | Limited lifetime |
Vehicle fitment
It is a direct fit for these vehicles in the rear position:
- 1992–1994 Chevrolet Blazer (Base, Cheyenne, Silverado, Silverado Sport)
- 1988–1999 Chevrolet K1500 (Base, Cheyenne, LS, Scottsdale, Silverado, Sport, WT)
- 1992–1999 Chevrolet K1500 Suburban (Base, LS, LT, Silverado)
- 1988–2000 Chevrolet K2500 (Base, Cheyenne, LS, Scottsdale, Silverado, WT)
- 1992–1999 Chevrolet K2500 Suburban (Base, LS, LT, Silverado)
- 1988–2000 Chevrolet K3500 (Base, Cheyenne, LS, Scottsdale, Silverado)
- 1995–2000 Chevrolet Tahoe (Base, LS, LT, Limited, Z71)
- 1989–1991 Chevrolet V2500 Suburban (Scottsdale, Silverado)
- 1988–1999 GMC K1500 (Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport)
- 1992–1999 GMC K1500 Suburban (Base, SLE, SLT)
- 1988–2000 GMC K2500 (Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX)
- 1992–1999 GMC K2500 Suburban (Base, SLE, SLT)
- 1988–2000 GMC K3500 (Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX)
- 1988–1991 GMC V2500 Suburban (Base, SLE, Sierra Classic)
- 1988–1991 GMC V3500 (Base, High Sierra, SLE, Sierra Classic)
- 1992–2000 GMC Yukon (Base, Denali, GT, SL, SLE, SLT, Sport)
Other Chevrolet and GMC models, and years outside the ranges above, are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A protective boot, a rebound bumper and double-welded loops come with the shock. Mounting parts are not included, so check the package contents against your installation before starting.









