Overview
The Rancho RS55168 is a front shock absorber for the 1987 to 1995 Jeep Wrangler YJ, sold individually and listed under the RS5000X Series. It uses a twin tube cellular gas design with a 5/8-in. (16 mm) tube, a rod that changes from chrome to nitro-carburized coating and a ten-stage velocity sensitive valving setup.
It covers the Jeep Wrangler YJ in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. Its lift rating is 0 – 2 in. of lift.
Key features
- Ten-stage velocity sensitive valving
- Twin tube cellular gas design, 5/8-in. (16 mm)
- 1/2-in. (12 mm) rod changing from chrome to nitro-carburized coating
- 1-3/8 inch diameter piston on most applications
- Limited lifetime warranty
First-generation Wrangler front shocks
The first-generation Wrangler has a stiff leaf-spring front axle, and its front shocks do much of the work controlling axle movement over ruts and washboard. A tired front shock can make the steering feel loose or cause the axle to wander at highway speed. Replacing worn units restores control, though the springs and bushings also affect how the truck feels.
Older Wranglers often have rust around shock mounts, so clean and inspect the eyes before installing a new unit. Check the bushings and mounting hardware for fatigue, and tighten fasteners to the correct torque for your vehicle. Recheck them after the first few drives, since fresh bushings can settle.
- Inspect shock eyes for rust
- Check bushings for fatigue
- Recheck fasteners after the first drives
- Replace worn links alongside shocks
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55168 |
| UPC | 10039703006337 |
| Series | RS5000 Series |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 0 – 2 in. lift |
| Hydraulic / gas charged | Gas charged |
| Tube | Twin tube cellular gas design, 5/8-in. (16 mm) |
| Rod | 1/2-in. (12 mm), chrome to nitro-carburized |
| Piston | 1-3/8 inch diameter (on most applications) |
| Warranty | Limited lifetime |
| Sold | Individually |
Vehicle fitment
It fits the 1987 to 1995 Jeep Wrangler (YJ), the first-generation Wrangler, in the trims covered above.
TJ, LJ and later Wranglers are not covered, and YJ years before 1987 fall outside it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the rod and mounting ends of your existing front shock with this unit, and check your lift against the 0 – 2 in. rating before choosing it.
What’s included
One front shock absorber, sold individually. Nothing about mounting hardware appears in the specs.












