Overview
The Rancho RS999312 is a rear RS9000XL series shock absorber for the 2005–2012 Nissan Pathfinder in the LE, S, SE, SE Off-Road, SV, Silver Edition and XE trims. It is a gas-charged, direct-fit shock with a 2.75 in. (70mm) body and an 18mm chrome rod.
A rear shock controls how the axle moves over bumps and under load. Rancho’s myRide system adds a 9-position tuning range that can be set manually or with the remote, so the ride setting can be changed without replacing the shock. Polyurethane bushings, a liquid metallic finish and a protective boot complete the design.
Shoppers checking fit should compare the part number RS999312 and the rear position with their own vehicle, since the trim list is the main fitment guide for this shock.
Key features
- 9-position myRide tuning with manual or remote adjustment
- 18mm chrome rod in a 2.75 in. (70mm) body
- Nitrogen gas charge
- Polyurethane bushings
- Liquid metallic finish
- Includes a Limited Lifetime Warranty and a protective boot
Rear shock setup and tuning
A rear shock on a Pathfinder controls how the rear axle moves over bumps and under load, which affects stability on highway drives and comfort on washboard roads. When the rear end starts to bounce or feel loose after a dip, the shock may be worn even if the springs look fine. Replacing the rear shocks as a pair keeps the rear end balanced and predictable for the driver.
The nine-position myRide system lets you change firmness without swapping parts. Firmer settings help when carrying cargo or towing a light trailer, while softer settings suit daily commuting. Set the tuning after the shock is in place, then drive the vehicle on a familiar road before making a second change.
Mounting hardware and bushings wear over time, so inspect them when the shock is off. Look for cracks in the boot and oil on the body, and check that the bolts are snug after the first few drives. Keep the rear suspension level and use the same setting on both sides when possible.
- Check the boot and body for oil or splits
- Compare rear ride height on both sides
- Re-check mounting bolts after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999312 |
| UPC | 10039703093122 |
| Shock series | RS9000XL |
| Position | Rear |
| Fitment type | Direct fit |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Lift height | w/0 – 1.75 in. Lift |
| Tuning | 9-position manual or remote (myRide) |
| Charge | Gas charged, nitrogen |
| Bushings | Polyurethane. |
| Finish | Liquid metallic |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
The manufacturer fitment list names the 2005–2012 Nissan Pathfinder in LE, S, SE, SE Off-Road, SV, Silver Edition and XE trims. Fitment is direct-fit in the rear position.
Pathfinder years after 2012 and the Nissan Xterra are not covered for this shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rated lift range is 0 to 1.75 in., so measure your current rear ride height before installing, and set the 9-position tuning after the shock is fitted.
What’s included
The protective boot is included. This shock carries a Limited Lifetime Warranty.














