Overview
The Rancho RS7112 is a rear monotube shock from the RS7000MT Series, a gas-charged damper built for off-road suspension upgrades. Rancho rates it as direct fit for vehicles running a 4 in. lift.
The ten stage velocity-sensitive valving reacts quickly to a wide range of trail obstacles. The gas charged, high-pressure monotube design helps dissipate heat for less fade and efficient damping. The body has a brushed-zinc clear coated finish and is made in America.
Key features
- Gas charged monotube body for heat dissipation and damping efficiency
- Ten stage velocity-sensitive valving
- 14mm chrome rod
- Brushed-zinc clear coated finish
- Black natural rubber bushings
- Protective boot included
- Rear position, direct fit for a 4 in. lift
Setting up a rear shock
Start by measuring the rear ride height and comparing it with the lift the shock is rated for. A shock that is too long or too short for the setup can bind at full extension or run out of travel. Measure the installed length of the old shock before buying, since that number tells you more than ride feel alone.
The gas charged monotube design is meant to resist fade when the shock runs hot, so it suits vehicles that see repeated trail use. Replace rear shocks in pairs, check the bushings and boot for wear, and look at the leaf or coil springs for sag. Inspect the bushings every time the shock is off, since cracked rubber lets the mount move and makes noise.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7112 |
| UPC | 39703002363 |
| Series | RS7000MT Series |
| Shock type | Monotube, gas charged |
| Position | Rear |
| Body diameter | 1.97 inch (50mm) |
| Body diameter per description | 2 inch |
| Rod | 14mm chrome |
| Valving | Ten stage, velocity-sensitive |
| Bushings | Black natural rubber |
| Finish | Brushed-zinc clear coated |
| Lift height rating | 4 in. lift |
| Fitment type | Direct fit |
| Country of manufacture | Made in America. |
Vehicle fitment
This shock is rated as a direct fit for a 4 in. lift. Check your year, model and trim against the fit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear shock absorber with a protective boot. Check the package contents against your installation before starting.









