Overview
The Rancho RS55065 is a front RS5000X series shock absorber for the 2018 Jeep Wrangler (JL), covering Rubicon, Sport, Sport S and Unlimited trims. It is rated for a 2 in. lift, so it suits a Wrangler JL that carries that lift height.
The shock uses progressive engagement valving and a tuned compression control valve. Its compressed length is 17.52, extended length 25.21 and travel length 7.69, so you can compare these figures with the shock already on the vehicle.
Key features
- Front-position design with progressive engagement valving
- Tuned compression control valve
- 2-1/4 inch twin tube body, gas pressurized
- 16mm rod, 35mm bore and a 1-3/8 inch sintered iron piston
- Rebound bumper, protective boot and double-welded loops
- Glass-filled, Fluon banded piston with a low-friction seal
Wrangler JL front shocks
The front shocks on a Wrangler JL carry a lot of the steering and braking load, so their condition affects how the truck tracks on the highway and how it recovers on rough trails. A shock that has lost damping can allow body motion that feels loose, while a shock that has been overworked may fade on repeated descents.
Lift height changes how the shock works, so a 2 in. lift setup should use a front shock sized for that height. If the truck has other suspension changes, such as larger tires or a different steering stabilizer, check how those parts interact with the new shock. After installation, have the front alignment checked, since changes to shock length can shift the camber and toe.
- Check the front shocks for leaks after each trail trip
- Inspect the upper mounts and bushings for cracking
- Look at the steering stabilizer when the front feels loose
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55065 |
| UPC | 10039703010136 |
| Series | RS5000X Series |
| Position | Front |
| Fitment type | Direct Fit |
| Charge | Gas Charged, gas pressurized body |
| Lift height | w/2 in. Lift |
| Compressed length | 17.52 (no unit given) |
| Extended length | 25.21 (no unit given) |
| Travel length | 7.69 (no unit given) |
| Body | 2-1/4 inch twin tube |
| Rod | 16mm nitro-carburized |
| Bore | 35mm, full-displaced |
| Piston | 1-3/8 inch diameter sintered iron, glass-filled, Fluon banded |
| Bushings | Black natural rubber |
| Seal | Low-friction, self-lubricating |
| Extras | Rebound bumper, protective boot, double-welded loops |
Vehicle fitment
It fits the 2018 Jeep Wrangler (JL) in Rubicon, Sport, Sport S, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
No other Wrangler generation or Jeep model appears on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount it in the front position, not the rear. A 2 in. lift rating means the front alignment should be checked once the new shock is installed.
What’s included
Check the package contents against your installation before starting.












