Overview
The Rancho RS5179 is a front shock absorber from the RS5000 Series. It fits 1981–1996 Ford Bronco and F-150 trucks and 1977–1979 Ford F-250 models. It also fits the 1987 and 1989–1991 Isuzu Trooper.
The RS5179 is suited to stock and lifted applications. It has a 4 in. lift setting with the outer mount at the lower mounting point, ten-stage velocity sensitive valving, and a 5/8-in. (16mm) rod with a 1 3/8-in. (35mm) piston.
Key features
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Red protective boot
- Gas charged body
Lift setup and mount location
Lift setting and mount location decide how a front shock works through its travel. When the outer mount sits at the lower mounting point, the shock angle and extension change, which affects both damping and steering clearance. Matching the setup to your truck’s build keeps the shock from binding at full compression.
Front shocks on trucks and SUVs usually wear with the rest of the front end, so inspect the bushings, tie rods and control arm bushings when replacing one. Check that the new shock clears brake lines, hoses and the steering linkage through full turns. After installation, a new alignment helps the tires wear evenly.
- Confirm the mount location before tightening
- Check clearance through full steering lock
- Inspect the boot for tears before installing
- Look for uneven front tire wear over time
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5179 |
| UPC | 10039703517901 |
| Series | RS5000 |
| Valving | Ten-stage velocity sensitive |
| Piston rod | 5/8-in. (16mm) diameter |
| Piston | 1 3/8-in. (35mm) diameter |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | 4 in. lift, outer at lower mounting |
| Charge | Gas charged |
| Boot | Red protective boot |
| Warranty | Limited lifetime |
Vehicle fitment
It fits these vehicles as a direct fit in the front position:
- 1981–1996 Ford Bronco (Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport)
- 1981–1996 Ford F-150 (Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat)
- 1977–1979 Ford F-250 (Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, XLT)
- 1987, 1989–1991 Isuzu Trooper (DLX, LS, S, SE, XS)
Other Ford and Isuzu models, and years outside the ranges above, such as F-150 years after 1996, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift setting is 4 in., with the outer mount at the lower mounting point. Check that your truck’s lift height and mount location match this setup before installing.
What’s included
Sold as each. A red protective boot is included. Have all bolts and brackets needed for installation on hand before starting.









