Overview
It is a rear RS9000XL Series shock absorber rated for a 2.5 in. lift. It fits a wide range of 1999 to 2013 Chevrolet, GMC, Dodge Ram and Hummer H2 trucks and SUVs, including 1500, 2500 and 3500 series models. It is gas charged and offers 9-position adjustable damping, and it is a direct fit on the models it covers.
Rear shocks control how the axle rebounds after bumps, so adjustable damping lets the setting follow the load you carry. This unit has a 2.75-in. (70mm) body and an 18mm chrome piston rod, and it uses red urethane bushings. The myRide system adjusts manually or with the remote.
The list is long, and several entries are Power Wagon, TRX or Laramie trims, so match your model year and trim against the fitment section before ordering.
Key features
- Rear position, rated for a 2.5 in. lift
- 9-position myRide manual or remote tuning
- Gas charged body
- 2.75-in. (70mm) body diameter
- 18mm chrome piston rod
- Red urethane bushings
- Liquid metallic finish
- Protective boot included
Rear shock damping basics
Rear shocks work against the axle as it rebounds after a bump, which keeps the tires planted and the rear end from bouncing. Under a heavy payload or a trailer, the rear end may need more damping than it does when the bed is empty, so a setting you can change is useful for mixed use. The rear axle also carries most of the load in a pickup, so the shocks see a lot of work over a year of driving.
When rear shocks wear out, the truck often sounds hollow over bumps, the rear end keeps bouncing after a dip, and the tires may show cupping. Because the rear axle carries most of the load, replacing shocks in pairs on the same axle keeps the ride balanced left to right. Take a close look at the bushings each time the tires are rotated.
- Check the bushings and boot for splits
- Inspect the mounting ends for wear
- Look for fluid streaks on the shock body
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999056 |
| Shock series | RS9000XL |
| Position | Rear |
| Lift rating | 2.5 in. lift |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm chrome |
| Tuning | 9-position myRide manual or remote |
| Charge | Gas charged |
| Bushings | Red urethane |
| Finish | Liquid metallic |
| Fitment type | Direct fit |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Rear direct fit for 2002 to 2006 Chevrolet Avalanche 2500 (Base, LS, LT); 2001 to 2003 and 2005 to 2006 Chevrolet Silverado 1500 HD (Base, LS, LT); 2007 Chevrolet Silverado 1500 HD Classic (LT); 1999 to 2004 Chevrolet Silverado 2500 (Base, LS, LT, WT); 2001 to 2010 Chevrolet Silverado 2500 HD (Base, LS, LT, LTZ, WT); 2007 Chevrolet Silverado 2500 HD Classic (LS, LT, WT); 2000 to 2013 Chevrolet Suburban 2500 (Base, LS, LT, LTZ); 2002 to 2008 Dodge Ram 1500 (Laramie, SLT, ST, SXT, Sport, TRX4); 2003 to 2010 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4); 2003 to 2010 Dodge Ram 3500 (Laramie, SLT, ST, SXT, Sport, TRX4); 2001 to 2003 and 2005 to 2006 GMC Sierra 1500 HD (SLE, SLT); 2007 GMC Sierra 1500 HD Classic (SLE, SLT); 1999 to 2004 GMC Sierra 2500 (Base, SL, SLE, SLT, WT); 2001 to 2010 GMC Sierra 2500 HD (Base, SL, SLE, SLT, WT); 2007 GMC Sierra 2500 HD Classic (SL, SLE, SLT, WT); 2000 to 2013 GMC Yukon XL 2500 (SLE, SLT); 2003 to 2009 Hummer H2 (Base); 2011 to 2013 Ram 2500 (Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman); and 2011 to 2013 Ram 3500 (Big Horn, Laramie, Laramie Longhorn, Lone Star, SLT, ST, Tradesman).
Models from 2014 and later, and trucks outside these makes, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A protective boot is part of the unit. Compare the hardware with your installation before starting.














