Overview
The Rancho RS999919 is a 2.25 inch Loaded QuickLIFT front left quick-strut for the 2007-2018 Toyota Tundra. It is a fully assembled front strut unit that comes with its coil spring and upper mount, made to level the front of a pickup or SUV and remove the factory nose-down rake.
The added ride height makes room for larger tires, up to 35 inches depending on application. The gas charged strut has nine adjustment positions and works with the myRIDE Wireless Controller, so ride quality can be changed from the driver’s seat as conditions change. The QuickLIFT design levels a truck’s front end without assembling separate parts.
Key features
- Complete front strut with coil spring and upper mount
- Fully assembled and ready for installation.
- Levels the front end and removes the factory nose-down rake
- Adds ride height for tires up to 35 inches depending on application
- Nine adjustment positions for tuning ride quality
- Compatible with the myRIDE Wireless Controller for changes from the cab
Ride tuning for a full-size truck
Ride height and damping work together on a full-size pickup. A higher front end can make the truck feel softer on the highway if the damper is set too loose, so the adjustment positions give you a way to balance comfort and control. Start in a middle position and make small changes after a few days of normal driving.
Trucks that tow or haul benefit from checking the rear springs and bushings when the front is lifted. Look for sagging, worn bushings or uneven shock wear, since these can make the front and rear feel out of step.
- Start in a middle damper position and adjust gradually
- Check rear springs and bushings for sag
- Inspect front ball joints during install
- Recheck wheel torque after the first drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999919 |
| Series | QuickLift Series |
| Position | Front left |
| Lift height | 2.25 inch |
| Adjustment | 9 positions |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the 2007-2018 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR and SR5 trims.
Toyota models other than the Tundra, and Tundra years outside 2007-2018, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing front ride height affects alignment and steering geometry, so have the front end aligned after installation. Keep the vehicle safely supported while working on the front suspension.
What’s included
The gas charged strut, coil spring and upper mount, fully assembled.
Not included: The myRIDE Wireless Controller is compatible with this unit but is not part of it.









