Select your vehicle

Rancho RS5000 Series Shock Absorber – RS55246

Rancho

$66.32In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 7:00 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5000 Series gas shock absorber for the rear of 1997–2002 Ford Expedition
  • Ten-stage velocity sensitive valving with a 16 mm rod and 35 mm piston
  • Fits vehicles without the Four Corner Air Leveling System
  • Part number RANRS55246

Description

Overview

The Rancho RS55246 is a rear RS5000 Series shock absorber for the 1997 through 2002 Ford Expedition, in the Eddie Bauer and XLT versions. It fits vehicles without the Four Corner Air Leveling System.

The shock is gas charged and uses ten-stage velocity sensitive valving with a 5/8-inch (16 mm) piston rod and a 1 3/8-inch (35 mm) piston. The RS5000 Series has served light trucks and sport utility vehicles since 1985 and is built for both stock and raised vehicles.

Key features

  • Rear position shock absorber
  • Gas charged design
  • Ten-stage velocity sensitive valving
  • 5/8-inch (16 mm) diameter piston rod
  • 1 3/8-inch (35 mm) diameter piston
  • Red protective boot included

Air leveling and rear shock choice

A rear shock controls how the axle moves over bumps and under load, so it works alongside the springs rather than replacing them. On an Expedition, the rear end also carries any leveling hardware, and that equipment changes how the suspension sits. Before buying, look at what your SUV has installed at the rear, since that decides whether this shock belongs on it.

When a shock is being replaced, inspect the mounting eyes and bushings at both ends as well. Worn bushings can make a new shock feel loose or noisy. Replacing shocks in pairs on the same axle keeps damping even from side to side, which helps the SUV track straight on uneven pavement and rough trails.

  • Check the bushings at both ends of the old shock
  • Look for oil residue or a damaged boot
  • Compare the mounting points before installing

Specifications

Brand Rancho
Part number RANRS55246
Series RS5000
Position Rear
Charge Gas charged
Valving Ten-stage velocity sensitive
Piston rod 5/8-inch (16 mm)
Piston 1 3/8-inch (35 mm)
Sold as Each

Vehicle fitment

It is a direct fit for the 1997 through 2002 Ford Expedition in the Eddie Bauer and XLT versions.

It fits vehicles without the Four Corner Air Leveling System. Confirm your Expedition’s equipment, year, model and trim before ordering.

What’s included

The shock comes with its red protective boot and is sold as each.

Fitment

VehicleYearsTrims
Ford Expedition1997–2002Eddie Bauer, XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RS55246 fit a 2003 Ford Expedition?

No. The shock fits 1997 through 2002 Expedition models only. Confirm the model year on your SUV before ordering this rear RS5000 Series shock.

Does this shock work on an Expedition with air leveling?

It fits Expedition models without the Four Corner Air Leveling System, so an air leveling equipped SUV is not a match. Confirm your vehicle's equipment before ordering.

Is the RS55246 gas charged?

Yes. It is gas charged and uses ten-stage velocity sensitive valving with a 16 mm rod and a 35 mm piston. A red protective boot is included.

How can I tell whether the old rear shock still needs replacing?

Look for oil leaking down the shock body, a torn boot, or a bouncy ride after bumps. Check the mounting bushings for cracks or play. Any of these signs suggests the shock has lost damping and should be replaced.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon