Overview
The Rancho RS999064 is a rear RS9000XL tri-tube shock for the 2018 through 2020 Jeep Wrangler (JL). It fits the two-door Rubicon, Sport and Sport S versions, and the Unlimited Rubicon, Sahara, Sport and Sport S versions.
It is built for stock height with no lift or drop. Its compressed length is 17.81 inches, its extended length is 24.40 inches, and travel is 6.59 inches. The large 2.75-inch (70 mm) tri-tube body uses nine-position tuning technology.
The RS9000XL is a manually adjustable nine-position ride control series made for on-road and off-road use and towing. A protective boot is included with the shock.
Key features
- Rear tri-tube shock at stock height
- Nine-position tuning technology
- Large 2.75-inch (70 mm) tri-tube body
- Protective boot
Rear shock replacement tips
The rear shocks on a Wrangler control axle movement over bumps, under acceleration and during braking, and they work with the coil springs and bump stops to manage body motion. A rear shock that has lost damping may let the back end bounce after dips or feel loose on washboard. Because the rear axle is heavy, worn units can also cause uneven tire wear over time.
When replacing a rear shock, measure the old unit’s compressed and extended lengths and confirm the mounting points. Inspect the bushings and the bolts that hold the shock to the axle and frame. Rear shocks are often replaced in pairs so damping stays balanced from side to side.
- Check the mounting bolts after the first drive
- Look for oil on the body or leaking seals
- Replace bushings that show cracks or wear
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS999064 |
| Series | RS9000XL |
| Position | Rear |
| Shock type | Tri-tube |
| Lift or drop | None |
| Compressed length | 17.81 inches |
| Extended length | 24.40 inches |
| Travel | 6.59 inches |
| Charge | Gas charged |
Vehicle fitment
It fits the 2018 through 2020 Jeep Wrangler (JL) in two-door and Unlimited four-door versions, in the rear position.
The list does not include the Gladiator, the Wrangler JK, or Wrangler JL years before 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is built for stock height, so check the lift on your Wrangler before installing. Compare the compressed and extended lengths with the unit being removed.
What’s included
A protective boot is included with the rear shock.











