Overview
The Rancho RS999923 is a 2.25-inch Loaded QuickLift front left quick-strut for Toyota Sequoia and Tundra pickups and SUVs. It arrives as a fully assembled strut with its coil spring and upper mount, designed to level the front end and remove the factory nose-down rake that many trucks and SUVs carry.
Leveling the front adds ride height, which allows larger tires, up to 35 inches depending on application. The strut offers 9 adjustment positions so the ride can be tuned to how the vehicle is driven. It works with the myRIDE Wireless Controller for changing those settings from inside the cab.
Key features
- Fully assembled quick-strut with coil spring and upper mount
- Designed to level the front and remove factory nose-down rake
- 2.25-inch lift in the QuickLift Series
- 9 adjustable positions for ride quality
- Compatible with the myRIDE Wireless Controller for adjustments from the cab
- Supports tires up to 35 inches depending on application
Fit and setup checks
A quick-strut combines the damper, spring and upper mount in one unit, which saves sourcing parts separately and keeps the spring rate matched to the damper. Before buying, confirm the year, model and trim against the vehicle, and check whether the factory front uses torsion bars or separate springs that could affect the swap. Front left replacements are often bought in pairs, so consider the other side at the same time.
Once installed, the front ride can feel firmer or softer depending on the damping setting. Start in the middle of the range and adjust after a few drives. Inspect the upper mount and bump stops during the job, since a worn mount can cause noise and uneven height.
- Confirm the trim before ordering
- Inspect upper mounts and bump stops during install
- Replace the opposite front strut if it is worn
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999923 |
| Lift height | 2.25 inch |
| Shock series | QuickLift Series |
| Position | Front Left |
| Fitment type | Direct Fit |
| Hydraulic / gas charged | Gas Charged |
| Adjustability | 9 positions |
| Maximum tire size | Up to 35 inches, depending on application |
| Controller compatibility | myRIDE Wireless Controller |
Vehicle fitment
This strut fits the 2001–2007 Toyota Sequoia in Limited and SR5 trims and the 2000–2006 Toyota Tundra in Base, Limited and SR5 trims. Ford models and other vehicles are not covered.
Later Sequoia and Tundra model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the strut is supplied fully assembled with its spring and upper mount, the job is a strut-for-strut replacement on the front left. Ride height changes after installation, so have the front alignment checked. Support the vehicle securely on stands before working on the front suspension.
What’s included
The kit includes the Loaded QuickLift strut, the coil spring and the upper mount.
Not included: The myRIDE Wireless Controller works with this part, but it is not included in the kit.









