Overview
The Rancho RS9000XL rear shock absorber, part number RS999112, is a gas-charged shock with a 2.75 in. body and an 18mm chrome rod, designed for a 4 in. lift. Rancho’s manufacturer list ties it to Chevrolet, GMC, Ford, Dodge, Mazda and Toyota trucks built from 1966 through 2009.
Rear shocks control how the axle rebounds after bumps, and this unit adds a 9-position tuning system that works manually or by remote. It has red urethane (polyurethane) bushings and a liquid metallic finish. The part is designed to balance road comfort with off-road control.
Key features
- Rear-position shock for a 4 in. lift.
- 9-position manual or remote tuning.
- Large 18mm chrome rod on a 2.75 in. (70mm) body.
- Nitrogen gas charged.
- Liquid metallic finish with red urethane bushings.
- Protective boot included.
Clearance and travel with a lift
A rear shock works through the full range of axle travel, and a lift changes how much of that travel gets used. With a 4 in. lift, the shock may run longer at ride height and reach a different point in its stroke at full droop. The clearance around the mounts, the brake lines and the spring should be checked after the parts go on, since the new geometry can shift where things sit.
Adjustable damping gives you a way to tune the rear end for different loads. A firmer setting can help control a heavy bed or trailer, while a softer one may suit an empty truck on washboard roads. Changing settings in small steps and driving the truck between them helps you find the right balance for your routes.
- Check full-compression clearance before the first trail run
- Inspect the boot for tears after rough use
- Re-check mounting bolts after the first few drives
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999112 |
| UPC | 10039703091128 |
| Shock series | RS9000XL |
| Position | Rear |
| Lift height | 4 in. |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position, manual or remote |
| Gas charge | Nitrogen gas charged |
| Finish | Liquid metallic |
| Bushings | Red urethane (polyurethane) |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
Rancho’s manufacturer list covers a broad run of Chevrolet and GMC full-size and light trucks, including K10 and K20 pickups and Suburbans from 1967 to 1986, Blazers from 1969 to 1974 and 1987 to 1991, and V10 and V20 models from 1987 to 1991. Ford F-100, F-150, F-250 and F-350 pickups, Ford Expedition, Dodge Ram 1500, Dodge Ram 50 and Raider, Mazda B3000 and B4000, and 1979–1983 Toyota Pickup models are also listed.
Jeep models, including Wrangler and Cherokee, and the Ford Bronco are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a 4 in. lift, check clearance at full compression and ride height after installation, because the lift changes how much travel the rear shock uses.
What’s included
The product includes a protective boot. Check the package contents against your installation before starting.














