Overview
The Rock Krawler Bomb Proof Front Track Bar and Bracket, part number RKSRK00399, is a front adjustable track bar kit for the Jeep Wrangler TJ and LJ. The bar is made from solid alloy steel, and the frame bracket is laser cut from 1/4 inch thick steel. The axle end hardware is upgraded and included in the kit.
A track bar holds the axle centered side to side. On a Wrangler with a lift, the stock bar can leave the axle off center, so an adjustable track bar and a frame-side relocation bracket let the axle be set back to center. This kit supplies both the bar and the bracket, so the two parts are sized to work together.
Parts carry an Abuse Proof Lifetime Warranty. Review the warranty terms before relying on it.
Key features
- Solid alloy steel adjustable front track bar
- Frame bracket laser cut from 1/4 inch thick steel
- Upgraded axle end hardware included in every kit
- Bar and bracket supplied as one kit
- Abuse Proof Lifetime Warranty
Frame bracket and bar setup
A front track bar with a matching frame bracket works as one system. The bracket sets the mount point at the frame, and the bar’s length sets the axle position, so the two should be fitted together. Solid alloy steel bars and steel brackets resist bending, but the pivot points still need periodic inspection.
Front axle ends take steady side loads, so the axle end hardware matters. After installation and alignment, look for play at the frame bracket bolts, worn bushings and any shift in the bar’s angle. Re-check after the first off-road trips, and replace worn joints before they affect the axle centering.
- Inspect frame bracket bolts for movement
- Check axle end hardware after off-road use
- Re-check alignment after the first trips
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK00399 |
| Position | Front |
| Bar material | Solid alloy steel |
| Bracket material | 1/4 in. laser cut steel |
| Axle end hardware | Upgraded, included |
| Warranty | Abuse Proof Lifetime |
Vehicle fitment
It fits 2004 to 2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon models, and 1997 to 2006 Jeep Wrangler (TJ) models, including the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wrangler YJ, JK and JL models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The axle end hardware is included, so separate axle end pieces are not needed for the fit. Have the front alignment checked once the bar is installed and set.
What’s included
The adjustable front track bar, the frame-side bracket and the upgraded axle end hardware.









