Overview
The Rock Krawler RK00338 is a front adjustable track bar and bracket for Jeep Wrangler TJ and LJ models with 5 inches to 7 inches of lift. The track bar keeps the front axle centered under the vehicle, and this kit pairs it with a bracket that relocates the track bar mount at the frame.
It is designed for the TJ and LJ Wranglers named below, and the bracket relocates the track bar mount at the frame. The bar is adjustable and built for durability.
Key features
- Solid alloy steel construction
- Track bar relocation bracket at the frame made from 1/4 inch thick laser cut steel
- Upgraded axle end hardware, included with the kit
- Durable black powder coat finish
- Adjustable for a 5 inch to 7 inch lift range
- Made in the U.S.A.
Bracket and bar setup
A relocation bracket changes where the track bar attaches at the frame, which changes how the bar angle affects the axle. On a lifted TJ or LJ, that can help keep the axle centered when the stock mount no longer lines up. Set the bar length after the lift is in place, since the length chosen at the bench may not match the final suspension height.
Because the mounting point moves, the joints and hardware at both ends of the bar take the load differently than the stock setup. Inspect the bushings, axle end hardware and bracket fasteners for wear and looseness after installation, and again after the first off-road trips. Alignment should be rechecked whenever the length is adjusted or a suspension component changes.
- Confirm drilling needs before starting
- Check axle end hardware for play after the first drive
- Recheck alignment after any length change
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK00338 |
| UPC | 70000452127 |
| Position | Front |
| Lift range | 5 inches to 7 inches |
| Bar material | Solid alloy steel |
| Bracket material | 1/4 inch thick laser cut steel |
| Finish | Durable black powder coat |
| Warranty | Abuse Proof Lifetime Warranty |
Vehicle fitment
It fits 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and 1997–2006 Jeep Wrangler (TJ) 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.
It does not fit JK, JL or YJ Wranglers. Confirm fit for your vehicle’s year, model and trim before buying.
Installation notes
The bracket moves the track bar mount at the frame, so set the bar length after the lift is installed and check alignment afterward. Check whether drilling is needed before starting the install.
What’s included
The kit includes the axle end hardware, the bracket and the track bar.
Not included: Confirm what hardware ships with the kit before installing.









