Overview
The Rancho RS70302 is a 1.5-inch rear lift block kit for 2019–2021 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. The blocks raise the rear to level the truck.
Each kit includes two rear blocks, four coated U-bolts, eight nuts and rear bump stop spacers. The kit accommodates larger wheel and tire combinations. Pairing the blocks with Rancho’s Level It System and Performance Upper Control Arms makes for a more complete upgrade.
Key features
- Raises the rear 1.5 inches
- Two rear lift blocks
- Four coated U-bolts and eight nuts
- Rear bump stop spacers included
- Designed to allow larger wheel and tire combinations
- Limited lifetime warranty
Driveline and alignment after lifting
Raising the rear changes the angle of the driveshaft and the geometry of the rear axle. Larger wheel and tire packages add rotating weight and change gearing, so the brakes, steering and driveline are worth checking when the setup changes. A rear-only lift can also leave the front sitting lower than the back, so front ride height matters when choosing a complete setup.
Re-torque the U-bolts after the first few drives and check them periodically. Worn rear shocks, bump stops and leaf spring bushings are often replaced alongside a lift, since they carry the new height and angles. A clean, careful installation keeps the rear feeling stable.
- Re-torque U-bolts after the first few drives
- Check driveshaft angles after installation
- Inspect rear shocks and bump stops for wear
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS70302 |
| Position | Rear |
| Lift height | 1.5 inches |
| Included | 2 rear blocks, 4 coated U-bolts, 8 nuts, rear bump stop spacers |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 2019–2021 Chevrolet Silverado 1500 and the 2019–2021 GMC Sierra 1500.
The list does not include the 2500 or 3500 HD trucks, or Silverado and Sierra 1500 model years before 2019 or after 2021. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lift blocks change the rear geometry, so check the driveline angles after installation and have the alignment checked. Confirm the bump stop spacers clear the frame before the job is finished.
What’s included
Two rear blocks, four coated U-bolts, eight nuts and rear bump stop spacers are included.









