Overview
The Rancho RS886506 is a 5.5 in. block kit, part number RS886506, that provides a 5.5 in. lift. It includes a block spacer, carrier bearing spacer, E brake bracket, cast offset riser block and hardware.
Key features
- 5.5 in. lift height
- Redesigned with a block spacer
- Cast offset riser block
- Includes carrier bearing spacer and E brake bracket
Driveline and clearance after a lift
A block kit raises the axle relative to the transmission and transfer case, which changes driveline angles. Steep angles can cause vibration, and worn U-joints fail sooner under them. Measure the angles at both ends of each shaft after installation and compare them with the limits for your vehicle’s driveline. Recheck lug nut torque after the first drive, and inspect the block bolts and hardware at each service.
The carrier bearing spacer moves the carrier bearing, so the driveshaft must sit square and free of binding. Brake lines and the parking brake cable may need extension or new routing when the axle moves down. Check shock length and bump-stop clearance too, since a block changes where the suspension sits at full droop.
- Measure driveline angles after installation
- Check brake line and parking brake cable length
- Recheck block hardware after the first drive
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS886506 |
| UPC | 39703004237 |
| Lift height | 5.5 in. |
| Hardware | Included |
| Type | Block kit |
Vehicle fitment
Rancho marks this block kit direct fit, but no year, make or model is named. Match the kit to your axle and driveline setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check driveline angles and alignment after installing a 5.5 in. lift. Confirm that the included E brake bracket and carrier bearing spacer suit your setup.
What’s included
Block kit with block spacer, carrier bearing spacer, E brake bracket, cast offset riser block and hardware.









