Overview
The 95-254F is a 2.5-inch rear lift block for leaf spring trucks, sold in pairs so one set covers both rear springs. Riser blocks are for the rear only and should never be used on the front of any vehicle.
The rear block raises the axle by its thickness between the leaf spring and the axle housing. The taper of the block is meant to keep the driveshaft angle in a usable range, and the 2.5-inch height is listed in the specifications as a single lift measurement.
Confirm the fit against your truck’s leaf spring rear suspension and U-bolts before ordering. Check the driveshaft angles after installation.
Key features
- 2.5-inch rear lift
- Sold in pairs
- Tapered block design
- For rear use only
Rear lift blocks and driveline angles
A leaf spring rear lift block raises the axle relative to the springs, which changes the angle of the driveshaft. Too much angle can wear the u-joints quickly and cause vibration at highway speed, so the taper of a block is meant to keep the angle workable. Once the block is in place, the pinion angle and driveline length should be checked before the truck is driven normally.
Leaf spring trucks often need longer U-bolts, and the shock absorber mounts may sit at a different angle after the lift. Inspect the spring pad, the center bolt and the axle seat for wear, since the block sits between parts that were not separated before. Retighten the U-bolts after the first drive and again after a short run, because the nuts can settle.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-254F |
| Position | Rear |
| Lift | 2.5 in |
| Quantity | Pair |
Vehicle fitment
Confirm fit for your vehicle’s year, model and rear suspension before ordering.
A rear lift block is sized for a specific leaf spring setup, so do not assume fit from the part name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the blocks at the rear only. Check the driveshaft angles after installation and confirm the U-bolts are long enough for the 2.5-inch height.
What’s included
A pair of rear lift blocks, as the product is sold in pairs.
Not included: U-bolts and hardware.





