Overview
The Raceline Wheels 947B Scout is a 17 x 9 inch aluminum spoke wheel in satin black, part number RLW947B-79081-12. It has an 8 on 170 bolt pattern, an offset of -12, a 125 center bore and backspacing of 4.5, and it is universal fit.
Raceline’s consumer wheels, including the Scout series, are adapted from technology the company developed for off-road racing. The 8 on 170 pattern has eight lug holes, so the hub and hardware must match that count. The negative offset moves the mounting face outward, which is one reason to check clearance before mounting.
Key features
- Aluminum construction in a 17 inch diameter and 9 inch width
- Spoke style in satin black
- 8 on 170 bolt pattern
- Offset of -12 with a 125 center bore
- Backspacing of 4.5
- Part of Raceline’s 947 Scout series
Offset and clearance
Offset sets where the mounting face sits relative to the centerline of the wheel, and that position decides how the tire lines up with the fender and steering components. A wheel with a negative offset moves the tire outward, which can change steering feel and let the tire reach body edges when the suspension compresses. Compare offset and backspacing with the wheel you are replacing, since a small change in either one can alter clearance.
Hub fit matters as much as outer dimensions. The center bore should match the hub, and hub-centric rings are a common way to close a gap when it does not. Lug seat style has to suit the wheel, because a mismatched seat can loosen under load. When a wheel comes off, inspect the hub face, studs and bearings for corrosion, since rust there can keep the wheel from sitting flat.
- Measure clearance at full steering lock and full suspension compression
- Check tire width against the fender opening
- Replace bent or corroded lug studs before mounting
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW947B-79081-12 |
| Series | 947 Scout |
| Diameter | 17 inches |
| Width | 9 inches |
| Offset | -12 |
| Center bore | 125 |
| Backspacing | 4.5 |
| Bolt pattern | 8 on 170 |
| Style | Spoke |
| Finish | Satin Black |
| Construction | Aluminum |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicle is identified for this wheel, so it is universal fit. Start by matching the 8 on 170 bolt pattern and the 125 center bore to your hub.
With a -12 offset and 9 inch width, the tire can sit further out than on a standard wheel, so confirm clearance. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eight lug holes need eight matching studs and nuts. Check the 125 center bore against the hub, and if the hub is smaller, fit hub-centric rings so the wheel centers before torquing.
What’s included
Check the package contents against your installation before starting.
Not included: Tires, lug nuts and center caps need to be obtained separately.









