Overview
The Raceline Wheels Clutch RLW934G-21060-19 is a 20 x 10-inch aluminum spoke wheel in gunmetal, set up for a six-stud 6 on 5.5 bolt pattern. It is part of Raceline’s 934 Clutch series, the consumer line the brand builds from its off-road racing wheels.
The 106 center bore centers the wheel on the hub. The -19 offset moves the mounting face outboard, so the wheel sits further out than a zero-offset design. Backspacing of 4.75 is the distance from the mounting face to the inner edge, a figure that drives brake and fender clearance.
The 20-inch diameter and 10-inch width mean the tire needs a matching size, so check tire fitment alongside the wheel.
Key features
- 20-inch diameter and 10-inch width
- 6 on 5.5 bolt pattern
- Spoke design in gunmetal
- Aluminum construction
- Part of the 934 Clutch series
- 106 center bore, -19 offset and 4.75 backspacing
Replacing a damaged wheel
A wheel that has been struck hard should be inspected before it goes back on the road. Look for cracks near the spokes, bends at the bead, and any signs of air loss. Gunmetal finishes can hide small chips, so run a hand along the lip and check the inner barrel with a light. A damaged wheel can fail suddenly under load, and repair is rarely a safe substitute for replacement.
Replacing one wheel can mean matching the others in diameter, width and offset, because mixed sizes affect the drivetrain and tire wear. Pull a tire and check the bead seat before remounting.
- Check for cracks at the spokes
- Inspect the bead seat after remounting
- Match offset across all four wheels
Specifications
| Brand | Raceline Wheels |
|---|---|
| Part number | RLW934G-21060-19 |
| Series | 934 Clutch |
| Wheel diameter | 20 inches |
| Wheel width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 106 |
| Offset | -19 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Gunmetal |
| Construction | Aluminum |
Vehicle fitment
The Universal Fit label is a design tag, not a vehicle match. Check the six-stud 5.5 pattern, 106 center bore and -19 offset against the vehicle hub before choosing this wheel.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lug seat style, then match the lug nuts or bolts to the wheel before mounting. Verify six studs on a 5.5 pattern and a 106 center bore against the hub, and choose lug hardware once the seat style is confirmed.
What’s included
Confirm lug nuts, center caps and valve stems before starting the install.









