Overview
The PSC Steering Stage 4 Firm Feel Cylinder Assist Kit, part number PSC-SK271, is a cylinder assist steering kit for 4-door Jeep Wrangler JK Unlimited models running 35-inch or larger tires and aftermarket axles. It includes a new steering gear, a new pump, a PSC ram tower and a steering cylinder, so the steering assist is supplied as one package.
Fitment covers the 2012-2016 Jeep Wrangler (JK) Unlimited in the Rubicon, Sahara, Sport and Sport S trims. The cylinder mount brackets are welded to the new axles and tie rod, and the high volume pump mounts in the factory position.
Key features
- New steering gear and pump in one kit.
- Stock OEM valving keeps handling close to the way the vehicle was engineered.
- Steering input effort stays the same as stock at all speeds.
- High volume pump kit with an external reservoir.
- 1.75 inch bore x 6.75 inch stroke x .625 inch rod SE steering cylinder.
- Gear box to cylinder complete hose kit.
Welded installs and axle prep
A welded bracket setup demands more preparation than a bolt-on kit. Before any metal is cut or welded, confirm the new axles and tie rod are the correct length and that the steering throw has been measured on each side. Small differences in axle geometry can change how the cylinder works through its range, so take the time to mock up the parts and check clearance before the final weld.
Welding also changes the way the truck will be serviced later. Keep the welds clean and inspect them after the first few trips, looking for cracks near the bracket edges and any movement at the tie rod. Document the measurements and the parts used so that future alignments and repairs start from a known baseline. A qualified welder can handle the fabrication and final checks.
- Measure steering throw on each side before welding
- Mock up brackets and check clearance first
- Inspect welds for cracks after the first trips
- Record measurements for future alignment work
Specifications
| Brand | PSC Steering |
|---|---|
| Part number | PSC-SK271 |
| UPC | 687927179042 |
| Body | 4-door models |
| Cylinder bore | 1.75 inch |
| Cylinder stroke | 6.75 inch |
| Rod diameter | .625 inch |
| Pump | High volume, external reservoir |
| Fluid | Swepco 715 Power Steering Fluid |
| Origin | Made in the U.S.A. |
Vehicle fitment
Covers the 2012-2016 Jeep Wrangler (JK) Unlimited in Rubicon, Sahara, Sport and Sport S trims.
2007-2011 Wrangler JK models and other trims are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Welding is required to attach the cylinder mount brackets to the new axles and tie rod, so have a qualified welder do the work. Measure your axle steering throw first, since PSC says steering geometry differs between axles. A power steering fluid cooler must be used with this high performance pump.
What’s included
New steering gear and pump, cylinder mount bracket kit, high volume pump kit with external reservoir, 1.75 inch x 6.75 inch cylinder with ram tower, and gear box to cylinder complete hose kit.
Not included: The power steering fluid cooler, which PSC says is required with this pump, and Swepco 715 Power Steering Fluid.


















