Overview
The PSC Steering FHK300P is a full hydraulic steering assist kit for 2.5 Ton Rockwell axles, rated for tires that turn up to 55 in. tall. It uses a Chevy P pump in a high volume configuration.
The kit is matched to the axle type; no vehicle years, makes or models are named.
Key features
- For 2.5 Ton Rockwell axles
- Turns up to 55 in. tall tire
- Uses Chevy P pump, high volume
- For Rockwell axle with pump
Hydraulic assist and axle loading
A hydraulic steering assist kit adds pump pressure to help turn heavy tires, so the axle, tie rods and steering arms carry more load than stock steering. Check those components for wear before adding assist, since a weak link can fail under the extra force. The pump and reservoir also need clean fluid to hold pressure.
Routing hoses cleanly keeps them away from heat, moving suspension parts and sharp edges. Check fittings for seepage after the first drives, and top up fluid to the level in your system’s procedure. Steering assist should feel consistent from side to side, so note any change in effort or noise.
- Check fluid level and condition
- Route hoses away from heat and moving parts
- Inspect tie rods and steering arms
Specifications
| Brand | PSC Steering |
|---|---|
| Part number | FHK300P |
| UPC | 687927175501 |
| Axle | 2.5 Ton Rockwell |
| Tire turning capacity | Turns up to 55 in. tall tire |
| Pump | Chevy P pump, high volume |
Vehicle fitment
Confirm your axle rating and pump type before ordering, since the kit is matched to 2.5 Ton Rockwell axles with a pump.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is listed with a pump and hydraulic components, so have it installed and checked by a shop familiar with hydraulic steering assist systems.
What’s included
The Chevy P pump, high volume, is part of the kit. Confirm lines, reservoir and mounting brackets against your installation before starting.









