Overview
The PSC Steering full hydraulic steering assist kit FHK400TJ (PSMFHK400TJ) is a complete full hydraulic steering kit for the Jeep Wrangler LJ and TJ. PSC designed it for vehicles with 42 inch and larger tires and aftermarket Dana 60 type axles.
Use SWEPCO 715 power steering fluid in full hydraulic systems, and add a power steering fluid cooler on high-performance steering setups to prevent pump damage from fluid degradation. The kit is for off-road use only and should be installed by qualified professionals.
PSC says its full hydraulic kits are sold for off-road use only and are meant for racing vehicles, and that performance modifications and installations are at the owner’s own risk. It adds that the kits should be assembled and installed by qualified professionals.
The FHK400TJ is a complete kit rather than a single component. It is designed for Jeeps with 42 inch and larger tires and aftermarket Dana 60 type axles, which place heavy demands on the steering. It is intended for owners planning a big-tire build on a Wrangler LJ or TJ, and professional installation and a fluid cooler are advised.
The kit is for off-road use only.
Key features
- Complete full hydraulic steering kit
- For Wrangler LJ and TJ
- Intended for 42 inch and larger tires
- For aftermarket Dana 60 type axles
- Direct-fit
Planning a full hydraulic build
A full hydraulic system replaces the mechanical link between the steering wheel and the front wheels with pump pressure and hoses. That change adds heat and load to the pump, so the fluid, cooler and hose routing become central parts of the build. Clearance matters too, since larger tires and a bigger steering setup change how components move through full lock and suspension travel.
Routine checks keep a system like this reliable. Inspect hoses and fittings for chafing, look for darkened or foamy fluid, and keep the reservoir at the correct level. Check the cooler mounting and airflow after any change in layout. Because steering failures are serious, verify every connection after the first drives and before heading out on demanding trails.
- Inspect hoses for chafing
- Check fluid color and foaming
- Verify cooler mounting and airflow
Specifications
| Brand | PSC Steering |
|---|---|
| Part number | PSMFHK400TJ |
| Type | Full hydraulic steering kit |
| Tire size | 42 inches and larger |
| Axle | Aftermarket Dana 60 type |
| Recommended fluid | SWEPCO 715 power steering fluid |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1987-1995 Jeep Wrangler YJ, the 1997-2006 Wrangler TJ, the 2004-2006 Wrangler Unlimited LJ and the 1984-2001 Cherokee XJ.
PSC’s description names the LJ and TJ in particular. The JK and JL are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use SWEPCO 715 power steering fluid with a fluid cooler. Installation should be done by qualified professionals, since the kit is for off-road use.









