Overview
The PSC Steering Big Bore XD2 Overlander steering upgrade kit SK284 (PSMSK284) is a steering kit for the 2012-2018 Jeep Wrangler JK with the 3.6L Pentastar engine. PSC designed it for vehicles with a stock front axle and 32-37 inch tires.
The kit handles the higher torque loads of larger tires and offers improved handling without oversteer and familiar road feel. It suits daily driven, on-road use. For on-road driving, set front axle caster at 4 to 7 degrees, depending on tire size and wheel offset.
The kit is aimed at JK owners who want improved handling without oversteer and without added steering effort, rather than a trail-only full hydraulic system.
The SK284 is a full steering upgrade kit for the JK rather than a single part, and it is intended for vehicles that keep the OEM front axle.
Key features
- Big Bore XD2 Overlander steering kit
- For the JK with the 3.6L Pentastar engine
- Intended for 32-37 inch tires
- For vehicles with the OEM front axle
- Aimed at on-road daily use
Caster and steering feel
Caster is the angle of the steering axis, and it affects how much the steering wants to return to center and how stable the vehicle feels at speed. Larger tires and changed wheel offset both shift that balance, which is why alignment matters more after a tire change. A steering upgrade improves the feel only when the geometry around it is set correctly.
Inspect tie rod ends, the drag link and ball joints for play as part of routine service, especially on a Jeep that sees frequent highway use. Check tire wear for feathering or cupping, which can indicate alignment drift. Keep the steering fluid and hoses in good condition, and replace any cracked boots or seals as soon as they appear.
- Check tie rod ends for play
- Watch for uneven tire wear
- Inspect boots and seals regularly
Specifications
| Brand | PSC Steering |
|---|---|
| Part number | PSMSK284 |
| Application | 2012-2018 Jeep JK, 3.6L Pentastar |
| Tire size | 32-37 inches |
| Recommended caster | 4-7 degrees |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2012-2018 Jeep Wrangler JK with the 3.6L Pentastar engine.
Earlier JK model years are outside this application. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
PSC recommends setting front axle caster to 4-7 degrees, depending on tire size and wheel offset, for comfortable on-road driving.









