Overview
The PSC Steering Extreme cylinder assist steering kit, part number SK856, is a hydraulic steering assist kit with a larger piston for more turning force. The gear box is a direct replacement part.
Hydraulic assist basics
Cylinder assist steering uses fluid pressure to help move the steering gear, so the assist kit and the steering gear work as one system. A larger piston gives more force for the same pressure, which reduces effort at the wheel. Check how the piston size, fluid supply and steering gear connections fit your existing setup before deciding on a kit.
Hydraulic assist work often leads to other parts being replaced, including fluid lines, hoses, seals and the reservoir. Inspect the lines for chafing and leaks before fitting new connections, and flush the system as your service manual directs. Look for fluid seepage, hard steering at low speed or whining noise as signs the system needs attention.
- Check fluid lines for chafing before installation
- Replace seals and hoses when the system is opened
- Watch for seepage at connections
- Refill and bleed the system after the work
Specifications
| Brand | PSC Steering |
|---|---|
| Part number | SK856 |
| UPC | 700007786511 |
| Type | Hydraulic steering assist |
| Piston | Larger |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Direct fit is a general category here, so match the gear box and mounting to your truck’s steering setup first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hydraulic steering assist work involves fluid lines and pressure connections, so a shop with hydraulic steering experience is the safer choice for this kit.
What’s included
Check the parts list against your installation before starting, since the kit’s individual components should be confirmed before fitting.









