Overview
The Trail Gear Rock Assault Ram Steering Assist Kit, part number 130056-1-KIT, is a hydraulic steering ram kit for the Rock Assault housing. It adds a ram to Toyota 4Runner and Toyota Pickup trucks in the years and trims listed below, and it comes with the ram and seals, rod ends, a ram bracket, hoses, JIC 90 degree elbows, steering box fittings and mounting hardware.
Trail Gear says its brackets are specially formed for easier installation, and each one is made from heavy-duty 1/4-inch plate steel. Confirm your year, model and trim before ordering.
Key features
- Specially formed brackets that Trail Gear says make installation easier.
- Each bracket is formed from heavy-duty 1/4-inch plate steel.
- Ram with seals and rod ends included.
- Hoses and JIC 90 degree elbows included.
- Steering box fittings and mounting hardware included.
- Trail Gear estimates about one hour for the ram installation.
How steering ram assist works
A steering ram sits alongside the steering linkage and pushes or pulls to lighten the effort needed at the wheel. It helps most on larger tires and rough ground, where the stock box and linkage carry a heavy load. The ram does not replace worn joints, so the steering should be checked before the work begins.
Ram assist places new loads on the mounts, the hoses and the box, so routine checks matter. Look at the bracket welds and bolts after the first trips, watch for fluid at the fittings, and keep hoses clear of tire and frame contact. Steering that feels different after a few weeks is often the first sign that something has loosened.
- Check mount bolts and welds regularly
- Inspect hoses at every fluid check
- Keep hoses clear of moving parts
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130056-1-KIT |
| UPC | 70000621331 |
| Product line | Rock Assault |
| Bracket plate | Heavy-duty 1/4-inch steel |
| Installation time | About one hour after the steering box is tapped |
| Included | Ram with seals, rod ends, ram bracket, hoses, JIC 90 degree elbows, steering box fittings, mounting hardware |
Vehicle fitment
It fits the 1984-1995 Toyota 4Runner in DLX and SR5 trims, and the 1979-1995 Toyota Pickup in Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims.
4Runner years after 1995 and Pickup years outside 1979-1995 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The steering box must be tapped before the ram is installed. Trail Gear estimates about one hour once that is done. Have the hydraulic routing checked by a qualified shop before driving.
What’s included
Ram with seals, rod ends, ram bracket, hoses, JIC 90 degree elbows, steering box fittings and mounting hardware.









