Overview
The Prothane Motion Control 7-215 is a red polyurethane front lower control arm bushing kit that comes with shells. It replaces rubber control arm bushings with polyurethane and has a 1 3/8 in. outside diameter.
The kit is universal fit, so no specific vehicle is matched to it.
Key features
- Front lower control arm position
- Shells included
- 1 3/8 in. outside diameter
- Polyurethane in place of rubber
- Red finish
Bore fit and pressing
The bore of the control arm decides whether a bushing seats correctly, so measure it before pressing anything in. A bore that is oval, scored or worn oversize lets a shelled bushing spin or walk out under load. Clean the bore thoroughly and remove any rust or old rubber, since debris can stop the shells from seating square.
Polyurethane bushings are firmer than rubber, so pressing them in takes steady force and careful alignment to avoid cocking the shell. Use a lubricant made for polyurethane and keep the arm supported. After the arm is back on the vehicle, check the bushing for movement and have the alignment checked, because lower arm position affects caster and camber settings.
- Measure the bore before pressing
- Remove rust and old rubber from the bore
- Check the shell is seated square after pressing
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 7-215 |
| UPC | 636169064173 |
| Position | Front lower |
| Outside diameter | 1 3/8 in. |
| Included | Shells |
| Color | Red |
| Type | Polyurethane |
| Fitment type | Universal Fit |
Vehicle fitment
Universal fit is the only fitment listed, so no specific year, make or model is matched to this kit.
Confirm your vehicle’s year, model and trim before ordering. Check the lower arm bore against the 1 3/8 in. outside diameter before pressing the bushing in.
Installation notes
Check that the arm bore suits the 1 3/8 in. outside diameter before pressing the bushing in. Bushings with shells usually need a press to install.
What’s included
Shells are included. Check the number of pieces against your installation before starting.









