Overview
The Prothane Motion Control 18-205 is a red polyurethane control arm bushing kit for the front position. It swaps rubber control arm bushings for polyurethane ones.
The kit is universal fit, so the vehicle match depends on your control arm design and your own mounting points.
Key features
- Front position
- Red finish
- Polyurethane in place of rubber
- Cited gains in suspension performance and feel
Front arm bushing wear
Front control arm bushings take steady load from braking and the weight of the vehicle, so they can wear faster than many other bushings on the suspension. Typical warning signs are a vague or wandering steering feel, a knock over uneven ground, and tires that wear on one edge. A quick check is to pry the arm gently and watch for movement at the bushing, which should feel firm rather than loose.
When replacing front arm bushings, inspect the ball joints, the arm itself and the mounting hardware, since a worn joint can mimic a bushing problem. Clean the bore thoroughly before pressing in the new bushings, and make sure they seat evenly. An alignment is a sensible follow-up, because front arm changes affect caster and camber.
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 18-205 |
| UPC | 636169015724 |
| Position | Front |
| Color | Red |
| Type | Polyurethane |
| Fitment type | Universal Fit |
Vehicle fitment
Universal fit means no year, make or model is matched to this kit, so fit depends on your own vehicle.
Check your vehicle’s year, model and trim before buying, then compare the front control arm mounts with the old bushings.
Installation notes
Rubber bushings are normally pressed out and polyurethane ones pressed in, which usually needs a press. An alignment check is a sensible step once the arm is refitted.
What’s included
Count the pieces on arrival and check them against your arm design.









