Overview
The Pro Comp 69404 is a Pro Runner upper control arm with an oversized stainless steel uniball joint, built to replace stamped factory arms with weak ball joints. It is a complete control arm rather than only a bushing, and it suits off-road use on lifted, leveled or stock trucks. No vehicle is named for it, so confirm the mounting points and ball joint layout for your truck before ordering.
Key features
- Oversized stainless steel FK uniball joint
- 1-inch chromoly tubular construction
- Reinforced pivot bushing mounts
- Large PTMEG pivot bushings with zerk fittings
- Billet machined dust cap to keep debris out of the uniball
- Black powder coat finish
Choosing an upper control arm
The upper control arm locates the top of the wheel and carries the ball joint that steering and suspension loads pass through. On a lifted or modified truck, the arm’s geometry matters as much as its strength, because the angle of the joint changes how the wheel moves through its travel.
A stronger joint and heavier tubing help on rough terrain, but the arm has to match the mounts already on the frame and axle. Before buying, compare the pivot points, the ball joint stud type and the arm length with the factory part you are replacing.
Upper arms are often replaced with the ball joint and bushings as a group, so inspect the lower joint and track bar at the same time. Grease the zerk fittings on a regular schedule and check the dust cap for cracks.
- Compare pivot points with the factory arm
- Check the ball joint stud type
- Inspect the lower ball joint and track bar together
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 69404 |
| UPC | 614901141672 |
| Position | Upper control arm |
| Joint | Stainless steel FK uniball |
| Tube | 1-inch chromoly |
| Pivot bushings | PTMEG with zerk fittings |
| Finish | Black powder coat |
| Fitment type | Universal listed |
The pivot bushings are PTMEG with zerk fittings, which keeps them quiet in operation and makes routine greasing straightforward.
Vehicle fitment
No vehicle is named for this arm. Match the control arm to your vehicle’s mounting points and ball joint layout before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Upper control arm changes alter front geometry, so the alignment should be checked after installation. The zerk fittings need periodic greasing.
What’s included
The arm comes with its uniball joint and dust cap. Review the parts you receive against the installation steps before you begin work.









