Overview
The Prothane Motion Control 1-204 is a red polyurethane control arm bushing kit that replaces rubber control arm bushings. It fits front or rear control arms that do not use a metal shell. Polyurethane bushings like these are often chosen for a firmer suspension feel during acceleration, cornering and braking.
No vehicle is named for this kit, which is labeled universal fit.
Key features
- Polyurethane bushings in place of rubber
- Red finish
- Front or rear application
- Designed for control arms without a metal shell
- Cited gains in feel and suspension performance
Choosing polyurethane for arms
Polyurethane bushings are firmer than rubber and pass more road and drivetrain vibration into the arm mount. That firmness is why many owners pick them for steering response and control, though the trade-off is more noise and a harsher ride on rough surfaces. Rubber stays quieter, and that difference matters most on a daily driven vehicle.
Because polyurethane is stiff, the arm bores should be clean and round before new bushings go in. Lubricant made for polyurethane bushings is commonly used during installation, and the arms should be checked for cracks or bent sections at the same time. Bushings in the front and rear arms often wear at similar rates, so inspect them together.
- Expect more noise than rubber on rough roads
- Clean and inspect arm bores before pressing
- Plan an alignment after the arms are reinstalled
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-204 |
| UPC | 70000422849 |
| Color | Red |
| Type | Polyurethane |
| Application | Front or rear, without metal shell |
| Fitment type | Universal Fit |
Vehicle fitment
This kit is labeled universal fit, so no specific vehicle year, make or model is matched to it.
The kit is universal fit, so no specific vehicle is matched to it. Confirm your vehicle’s year, model and trim before ordering, and check whether your control arms have a metal shell, since this kit is made for arms without one.
Installation notes
Removing rubber bushings and pressing polyurethane ones in usually takes a press and the right tools. Get the alignment checked once the arm is back on the vehicle.
What’s included
Count the pieces and hardware you receive against your arm design before installing.








