Overview
The Prothane Motion Control 1-204-BL is a black polyurethane control arm bushing kit made to replace rubber control arm bushings. It is intended for front or rear control arms that lack a metal shell.
Many drivers choose polyurethane for a firmer feel under acceleration, cornering and braking. This kit is universal fit and not tied to a specific vehicle.
Key features
- Black polyurethane construction
- Replaces rubber bushings
- Front or rear use on arms without a metal shell
- Cited improvements in suspension feel
Front or rear arm checks
Front and rear control arms carry different loads, and the bushing position changes how much movement and vibration reaches the frame. Before buying a kit, identify whether your arms are front or rear, and confirm whether the arm has a metal shell around the bushing. That check decides whether a polyurethane kit is suitable at all, and it prevents wasted time at the bench.
Polyurethane is stiffer than rubber, so the trade-off is more road noise and vibration in the cabin on rough surfaces. Many owners accept that trade for a more direct feel. Keep the arms clean during pressing, use a lubricant made for polyurethane bushings, and inspect the ball joints and mounts while the arms are out, since worn parts are easier to replace at that stage.
- Identify front or rear arms before ordering
- Look for a metal shell around the bushing
- Inspect ball joints while the arms are removed
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-204-BL |
| UPC | 636169003486 |
| Color | Black |
| Type | Polyurethane |
| Application | Front or rear, arms without metal shell |
| Fitment type | Universal Fit |
Vehicle fitment
Universal fit is the only fitment listed, with no year, make or model attached.
Confirm fit for your vehicle’s year, model and trim before ordering. If your arms have a metal shell, this kit is not suited to them.
Installation notes
Pressing out the rubber bushings and pressing in polyurethane ones calls for a press and tools sized to the arm bore. Plan an alignment after the arms are back in.
What’s included
Count the pieces and hardware you receive against your arm design before installing.








