Overview
The Moog K200185 is a forward position front lower control arm bushing for the 2006–2010 Dodge Ram 1500 with 5-lug wheels. It is a direct-fit replacement for the bushing at the front of the lower control arm.
Worn control arm bushings can cause early tire wear, handling problems and noise under the truck. The bushing takes up road impacts and keeps the wheel assembly in position.
Key features
- Forward position front lower control arm bushing
- For 5-lug wheels
- Direct fit for the 2006–2010 Ram 1500
Signs of a worn bushing
A lower control arm bushing sits where the arm meets the frame and absorbs movement as the wheel travels. When it wears, the front end can feel loose, wander on the highway and produce a knock over bumps. Uneven tire wear along the inside or outside edge can also point to a bushing that no longer holds the arm in position.
Replacing one bushing is common, but the opposite side has seen the same road loads, so inspect it at the same time. Look for cracked rubber, separation between the metal sleeves, and play when the arm is moved by hand with the vehicle safely supported. Replacing a worn part can change caster or camber slightly, so an alignment check afterward is wise.
Other front suspension parts often wear at the same time. Ball joints, tie rod ends, sway bar links and the steering components should be inspected during the job, since a worn joint can mimic a bushing problem and leave the new part working under strain.
Specifications
| Brand | Moog |
|---|---|
| Part number | K200185 |
| Position | Front lower control arm, forward |
| Wheel fitment | 5-lug |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006–2010 Dodge Ram 1500 in Laramie, SLT, SRT-10, ST, SXT, Sport, TRX and TRX4 trims.
The list does not include the 2011 and later Ram 1500, the 2500 or 3500 trucks, or the rearward bushing position. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.










