Overview
The Pro Comp 57002B is a Pro Runner upper control arm with 1-inch Uniball ball joints and heavy-duty chromoly tubing, for lifted, leveled or stock trucks. It replaces factory upper control arms that have weak ball joints and stamped steel construction.
The arm uses oversized stainless steel FK Uniball joints, reinforced pivot bushing mounts and large PTMEG pivot bushings with zerk fittings. A black powder coat finish protects the tubing.
The 57002B is a 1-inch Uniball arm with heavy-duty chromoly tubing. It has the smallest joint in its group, so check the joint size against your factory arm before ordering. The arm carries the same reinforced bushing mounts, zerk fittings and black powder coat finish as the other arms in the range.
Key features
- 1-inch Uniball ball joints in stainless steel FK
- Heavy-duty 1-inch chromoly tubular construction
- Reinforced bushing mounts
- Large PTMEG pivot bushings with zerk fittings
- Zerk dust caps included
- Black powder coat finish
Smaller joints and light use
A smaller ball joint suits lighter loads than a larger one, and the right choice depends on how the truck is driven. Compare the joint size with the factory part and think about how much bump, braking and trail use the arm will see.
Chromoly tubing and reinforced bushing mounts help control flex, but they do not change the arm’s geometry. Confirm the mounts line up with your truck before installation, and check that the knuckle and boot fit the joint.
Grease the pivot bushings through their fittings at regular intervals. Inspect the dust cap for tears and clean debris from the joint area during tire service.
- Match joint size to your driving
- Check the knuckle and boot fit
- Grease the fittings at regular intervals
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57002B |
| UPC | 614901099676 |
| Position | Front upper |
| Ball joints | 1-inch Uniball, stainless steel FK |
| Tubing | Heavy-duty chromoly, tubular, 1 inch |
| Bushings | PTMEG pivot bushings with zerk fittings |
| Dust caps | Zerk dust caps included |
| Finish | Black powder coat |
Vehicle fitment
No year, make or model is named for the 57002B. Confirm your vehicle’s year, model and trim before ordering.
Compare the joint size and mounting points with your factory arm, since no vehicle is named for this part.
What’s included
Zerk dust caps are included with the arm.






























