Select your vehicle
-13%

Rough Country Jeep Adjustable Control Arms – 11900

Rough Country

$234.51In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 16, 2026 11:50 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Adjustable front lower control arm, Rough Country 11900
  • X-Flex ball-in joints with 2.5 inch diameter body
  • Recommended for 0 to 6.5 inch suspension lift kits
  • Lower arm joints pivot up to thirty-five degrees
  • Fits Jeep XJ, Comanche, ZJ, LJ and TJ

Description

Overview

The Rough Country 11900 is an adjustable front lower control arm for Jeep TJ, ZJ, XJ and MJ models. It uses X-Flex joints, with a ball-in joint, a 2.5 inch diameter body and 1.25 inch threads, for range, strength and safety off-road.

Rough Country recommends the arm for models with 0 to 6.5 inch suspension lift kits. The lower arm joints are capable of a thirty-five degree pivot range, which is the more demanding arm position.

Key features

  • X-Flex ball-in joints
  • 2.5 inch diameter joint body
  • 1.25 inch threads
  • Lower arm joints pivot up to thirty-five degrees
  • Adjustable length

Adjustable lower arm setup

An adjustable arm lets you set the length so the axle can be brought back toward the correct position after a lift. Stepping the length in small amounts makes it easier to keep the arms even from side to side. Keep track of each change so you can return to a known setting if the alignment does not come out right. The arm is best matched to lifts in the 0 to 6.5 inch range, where its length range is designed to work.

Threaded joints need clean threads and regular greasing. Inspect the joints for play and check that the jam nuts hold their setting after the first trail runs. The X-Flex ball-in design needs free movement through its full pivot range, so look for binding or rubbing against the frame and body.

  • Clean and grease threads before adjusting
  • Lock jam nuts fully after each length change
  • Check for binding at full steering lock

Specifications

Brand Rough Country
Part number 11900
Position Front lower
Joint type X-Flex ball-in
Joint body 2.5 inch diameter
Thread size 1.25 inch
Recommended lift 0 to 6.5 inch suspension lift kits

Vehicle fitment

It fits the 1984–2001 Jeep Cherokee (XJ), the 1986–1992 Jeep Comanche, the 1993–1998 Jeep Grand Cherokee (ZJ), the 2004–2006 Jeep Wrangler (LJ) Unlimited and the 1997–2006 Jeep Wrangler (TJ).

It is made for the TJ, ZJ, XJ and MJ front lower arms, plus the TJ and ZJ rear lower arms. The JK, JL Wrangler and WJ Grand Cherokee are outside its fit. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Recommended only for lifts within the 0 to 6.5 inch range. Have the front alignment checked after installation, since the adjustable length changes caster.

What’s included

One adjustable front lower control arm with X-Flex joints.

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1984–2001Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE, Sport
Jeep Comanche1986–1992Base, Chief, Custom, Eliminator, Laredo, Pioneer, X, XLS
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rough Country 11900 fit a Jeep TJ?

Yes. It is made for the Jeep TJ front lower control arms, and the TJ rear lower arms are also covered. The 1997–2006 Jeep Wrangler (TJ) is a supported model.

Is this arm for a stock height Jeep?

The recommended range is 0 to 6.5 inch suspension lift kits, so a stock height Jeep is within that range.

What do the joints pivot?

The upper arm joints pivot up to twenty degrees, and the lower arm joints pivot up to thirty-five degrees. The joints are X-Flex ball-in designs with a 2.5 inch body.

Does a lift change the setting this arm needs?

Yes. As the lift height changes, the arm length is adjusted to restore the wheel geometry. The suitable lift range is 0 to 6.5 inch kits, so set the arm within that range and check alignment after each change.

How should the threaded joint be maintained?

Keep the threads clean and greased, and inspect the joint for play and damage at each service. Lock the jam nuts tight after adjusting, and check that the joint pivots freely through its travel before going back on the trail.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon