Overview
The Rubicon Express R/ERE3726 is a rear upper adjustable control arm for the 2020 to 2026 Jeep Gladiator JT. It supports a short arm suspension and can serve as a replacement for damaged factory upper control arms.
The arm is made from thick wall DOM tubing and uses the Rubicon Super-Flex joint. Its adjustable length allows pinion, caster and wheelbase to be set for the build.
Key features
- Rubicon Super-Flex joint for axle articulation off road
- Thick wall DOM tubing
- Adjustable for pinion, caster and wheelbase
- Powder coated for corrosion resistance
Upper arm setup tips
An upper control arm locates the axle and controls its fore and aft movement, which helps keep the axle from twisting under acceleration and braking. Because the upper arm works with the lower arms, a change in one arm can shift the whole suspension geometry.
When setting an adjustable upper arm, measure the length on both sides and keep them the same. Recheck the alignment after the adjustment and confirm the joint moves freely through the full suspension travel. Tightening the jam nuts only after the length is confirmed prevents slow drift.
Inspect the arm regularly for cracked welds, bent tubing and play at the joint. Damage to the tube or threads should be addressed before the arm is used on the trail.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/ERE3726 |
| Position | Rear upper |
| Type | Tube |
| Joint | Rubicon Super-Flex |
| Tubing | Thick wall DOM |
| Finish | Powder coat |
Vehicle fitment
It fits the 2020 to 2026 Jeep Gladiator JT.
It does not fit the Wrangler JL or JK. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because the length adjusts, the upper arm sets pinion, caster and wheelbase together, so the alignment should be checked after installation. Use the adjustment to match the build, then confirm the joint moves freely through the full suspension travel.
Check the adjustment settings are the same on both arms once the length is set, so the pinion and caster stay consistent from side to side.
What’s included
One rear upper adjustable control arm under part number R/ERE3726.









