Overview
The Rough Country 11380 is a rear upper adjustable control arm for the 2007–2018 Jeep Wrangler (JK), in both 2-door and Unlimited 4-door bodies. It uses X-Flex joints with a ball-in design, a 2.5 inch diameter body and 1.25 inch threads, which Rough Country says offer considerable range, strength and safety for off-road use.
The upper arm joints pivot up to twenty degrees, while the lower arm joints are capable of thirty-five degrees of pivot. Those figures describe how far the joints can move, so the arm suits a rear suspension that is flexing over rough ground.
Key features
- X-Flex ball-in joints
- 2.5 inch diameter joint body
- 1.25 inch threads
- Upper arm joints pivot up to twenty degrees
- Lower arm joints capable of thirty-five degrees of pivot
- Rear upper position
Choosing a rear upper arm
A rear upper control arm sets the axle’s position relative to the frame and controls pinion angle. When the arm is adjustable, its length can be set to bring the axle back into line after a lift, which helps the driveline stay within its normal working range. Adjustable arms also help the axle track straight under load as the rear suspension flexes over uneven ground.
Because a change in length moves the axle, plan the adjustment before the arm is fully tightened. Ball-in joints allow a wide range of movement, but their boots and seals should be checked for tears, and each joint should be inspected for play before every trail season.
- Set the length with the vehicle at ride height
- Recheck pinion angle after every change
- Inspect boots for cracks or lost grease
- Replace a joint that feels loose or clicks under load
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C11380 |
| Position | Rear upper |
| Joint type | X-Flex ball-in |
| Joint body | 2.5 inch diameter |
| Thread size | 1.25 inch |
| Upper arm pivot | Up to twenty degrees |
| Lower arm pivot | Thirty-five degrees |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) in 2-door and Unlimited 4-door models, across the Sport, Sahara, Rubicon and X lines and the anniversary editions.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for the JL Wrangler, the Gladiator, and the TJ and LJ Wrangler.
Installation notes
Changing the length of a rear upper arm alters axle position and pinion angle, so have the rear alignment and driveline angles checked after installation.
What’s included
One rear upper adjustable control arm with X-Flex joints.









