Overview
The Pro Comp U-Bolt Kit, part number 50050, is a U-bolt kit for Chrysler 8.25 inch axles and a 3.5 inch rear lift. It is for Chrysler 8.25 inch axles only.
The kit is packaged with new hi-nuts and extra thick washers. Pro Comp says U-bolt lengths are usually adequate for stock and aftermarket leaf spring packs. The U-bolts are made from low-alloy high strength steel, with round styles zinc plated and square styles left unplated so the steel at the bends stays intact. Pro Comp rates the U-bolts as equivalent in strength to a Grade 5 bolt.
Key features
- For Chrysler 8.25 in. axles
- 3.5 in. rear lift
- Hi-nuts and extra thick washers in the kit
- Low-alloy high strength steel construction
- Round U-bolts zinc plated, square U-bolts unplated
Axle and spring pack match
An 8.25 inch axle is a common size, but axle housings differ in width, spring perch position and pinion angle between model years, so the axle size alone does not guarantee a fit. Measure the axle housing diameter and the distance between spring perches before fitting. Compare these measurements with the existing U-bolt, which shows the thread length and bend radius you need.
U-bolt clamp force depends on correct torque and on the spring pack thickness. Thicker packs and added spring plates can change how much thread engages the nuts, so check thread engagement after installation. Spring plates, pads and pinion angle are commonly reviewed when a lift is added, and a shock with the right length for the new ride height helps the suspension work through its travel.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 50050 |
| UPC | 61490111034 |
| Axle | Chrysler 8.25 in. |
| Rear lift | 3.5 in. |
| Material | Low-alloy high strength steel |
| Finish | Round U-bolts zinc plated; square U-bolts unplated |
| Strength | Equivalent to a Grade 5 bolt (per Pro Comp) |
| Included | Hi-nuts and extra thick washers |
Vehicle fitment
The kit is for Chrysler 8.25 inch axles and is a direct fit. Confirm the axle size before ordering, and confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp says U-bolt lengths are usually adequate, so measure your spring pack and axle before installing.
Support the axle on stands while the U-bolts are tightened.
What’s included
The kit is packaged with new hi-nuts and extra thick washers. The leaf springs and axle are not included.






