Overview
The Pro Comp Suspension 63202 is a rear lift block with U-bolt kit, rated at 2 inches of lift in its title. It has two cast iron tapered riser blocks, four U-bolts, eight heavy duty flat washers and eight hi-nuts, packed in a box.
Key features
- Tapered cast iron riser blocks
- Complete U-bolt kit
- Heavy duty flat washers and hi-nuts
Choosing a lift height
Rear lift kits raise the axle on the leaf springs, and the height of the lift affects the driveshaft angle, shock length and the position of the brake lines. A small lift changes these relationships less than a large one, but the same checks still apply. Before choosing a kit, confirm the lift you need for your tires and the clearance you want, and compare that with the vehicle’s current ride height.
U-bolt kits are sized for the stack height of the spring pack and the axle, so the hardware should clear the housing and seat square. Lift kits are often installed together with new shocks or a driveline inspection, since both are affected by the new axle position.
- Confirm the lift height before buying
- Check the shock length after fitting
- Inspect the driveline and U-joints for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 63202 |
| UPC | 614901022483 |
| Lift height | 2 in (title); 3.5 in (description) |
| Riser material | Cast iron |
| Risers | 2 |
| U-bolts | 4 |
| Flat washers | 8 heavy duty |
| Hi-nuts | 8 |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit kit. Confirm the lift height and your leaf spring setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After the kit is in, check the driveshaft angle and the U-bolt fit against your axle.
What’s included
Two cast iron riser blocks, four U-bolts, eight heavy duty flat washers and eight hi-nuts.







