Overview
The Pro Comp 50030 is a U-bolt kit for a 3.5 inch rear lift. Pro Comp says its U-bolt kits are packaged with new hi-nuts and extra thick washers, and that the U-bolt lengths are usually adequate for stock and aftermarket leaf spring packs.
The U-bolts are made from low-alloy high strength steel and are equivalent in strength to a Grade 5 bolt. Round style U-bolts are zinc plated, while square U-bolts are unplated to preserve the integrity of the steel at the bent points.
Key features
- For a 3.5 inch rear lift
- Includes new hi-nuts and extra thick washers
- Low-alloy high strength steel
- Strength equivalent to a Grade 5 bolt.
- Round style U-bolts zinc plated, square style unplated
- Lengths usually adequate for stock and aftermarket leaf spring packs
Measuring before you order
U-bolts clamp the axle to the leaf spring pack, so their fit depends on the axle diameter, the spring pack thickness and the width between the spring seats. Before ordering, measure the existing U-bolts and compare them with the old pack. Note whether the old bolts are round or square style, since the finish and bend shape change how the new set seats against the axle.
Worn U-bolts can stretch or lose their thread, and corroded nuts can strip during removal. Soak the nuts with penetrating oil and use new hardware when refitting. Clean the spring pack seat and check the axle for damage before tightening the new U-bolts. Keep the washers in place because they spread the load over the spring pack.
A 3.5 inch rear lift can also change the driveshaft angle and brake line length, so inspect those parts once the work is done.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 50030 |
| UPC | 614901110326 |
| Part type | U-bolt kit |
| Application | 3.5 inch rear lift |
| Material | Low-alloy high strength steel |
| Strength | Equivalent to a Grade 5 bolt |
| Plating | Round style zinc plated; square style unplated |
| Hardware | Hi-nuts and extra thick washers |
| Fit type | Direct Fit |
Vehicle fitment
Fit depends on your axle and leaf spring pack. Confirm fit for your vehicle’s year, model and trim before ordering.
Measure your existing U-bolts and spring pack to confirm the kit suits your axle before ordering.
Installation notes
Suspension work affects steering, braking and stability, so professional installation is a good choice unless you have the tools and experience to do it safely. Support the vehicle on jack stands, never on a jack alone, and have the alignment checked after any suspension work. Check local regulations on lift height and re-check fasteners after the first miles. Tighten the U-bolts to the torque value for your axle and re-check after the first miles.
What’s included
The kit includes new hi-nuts, extra thick washers and the U-bolts.








